CSM12-13 Datasheet, PDF (1/3 Pages) Tyco Electronics – Low Cost High IP3 Mixer for PCS/WLL Applications

CSM12-13
Low Cost High IP3 Mixer for
PCS/WLL Applications
Features
• LO & RF 1800 to 2000 MHz
• IF 10 to 150 MHz
• LO Drive +13 dBm (nominal)
• Surface Mount
• High Intercept +22 dBm (typ)
Description
The CSM12-13 is a double balanced mixer, designed for use in
the high volume wireless applications. The design utilizes Schot-
tky ring quad diodes and broadband baluns to attain excellent
performance. The use of high temperature solder assembly proc-
esses used internally makes it ideal for use in semi-automated
and automated assembly.
Ordering Information
Part Number
CSM12-13
Package
Surface Mount
Product Image
Rev. V2
Electrical Specifications: Z₀ = 50Ω Lo = +13 dBm (Downconverter application only)
Parameter
Test Conditions
Typical
Units
Guaranteed
+25ºC -40º to +85ºC
SSB Conversion Loss
(max)
fR = 1800 to 2000 MHz, fL = 1800 to 2000 MHz, fI = 60 MHz
dB
6.7 dB
8.0
8.5
SSB Noise Figure
(max)
Within 1 dB of conversion loss
dB
____
____
____
L - R Isolation (min)
fL = 1800 to 2000 MHz
dB
30
25
23
L - I Isolation (min)
fL = 1800 to 2000 MHz
dB
28
24
22
R - I Isolation (min)
fR = 1800 to 2000 MHz
dB
1 dB Conversion Comp.
fL = +13 dBm
dBm
Input IP3
fR1 = 1800 to 2000 MHz, fR2 = 1800 to 2000 MHz, fL = 10 to 150 MHz dBm
R-Port VSWR
fR = 1800 to 2000 MHz
L-Port VSWR
fL =1800 to 2000 MHz
I-Port VSWR
fI = 10 to 150 MHz
20
+8
+22
1.5:1
2.5:1
1.75:1
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.