CSM1-17 Datasheet, PDF (1/3 Pages) Tyco Electronics – Low Cost High IP3 Mixer for Cellular Applications

CSM1-17
Low Cost High IP3 Mixer for
Cellular Applications
Features
• LO & RF 10 TO 1500 MHz
• IF 1 TO 500 MHz
• LO DRIVE +17 dBm (NOMINAL)
• SURFACE MOUNT
• HIGH INTERCEPT +27 dBm (TYP.)
• +260°C REFLOW COMPATIBLE
Description
The CSM1-17 is a double balanced mixer, designed for use in the
high volume wireless applications. The design utilizes Schottky
ring quad diodes and broadband baluns to attain excellent per-
formance.
Ordering Information
Part Number
CSM1-17
Package
Surface Mount
Product Image
Rev. V3
Electrical Specifications: Z₀ = 50Ω Lo = +17 dBm (Downconverter application only)
Parameter
Test Conditions
Typical
Units
Guaranteed
+25ºC -40º to +85ºC
SSB Conversion
fR = 10 to 1000 MHz, fL = 10 to 1000 MHz, fI = 1 to 500 MHz
dB
6.5
7.0
7.5
Loss (max)
fR = 1000 to 1500 MHz, fL = 1000 to 1500 MHz, fI = 1 to 500 MHz
dB
7.5
8.0
8.5
SSB Noise Figure
L - R Isolation
(min)
L - I Isolation (min)
R - I Isolation (min)
1 dB Conversion
Comp
Input IP3
R-Port VSWR
L-Port VSWR
fL = 10 to 1500 MHz
fL = 10 to 1500 MHz
fR = 10 to 1500 MHz
fL = +17 dBm
fL = 10 to 1500 MHz, fI = 1 to 500 MHz, fR = 10 to 1500 MHz
fR = 10 to 1500 MHz
fL = 10 to 1500 MHz
dB
dB
dB
dB
dBm
dBm
Within 1 dB of conversion loss
40
35
33
30
25
23
27
+14
+27
1.50:1
2.00:1
I-Port VSWR
fI = 10 to 500 MHz
1.50:1
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.