AT90-1107 Datasheet, PDF (1/7 Pages) Tyco Electronics – Digital Attenuator, 31.5 dB, 6-Bit, TTL Driver, DC-4.0 GHz

AT90-1107
Digital Attenuator
31.5 dB, 6-Bit, TTL Driver, DC-4.0 GHz
Rev. V15
Features
• Attenuation: 0.5 dB Steps to 31.5 dB
• Single Positive Supply
• Contains internal DC to DC converter
• Low DC Power Consumption
• Small Footprint, JEDEC Package
• Integral TTL Driver
• 50 ohm Impedance
• CSP-1 Package
Schematic with Off-Chip Components
Description
M/A-COM's AT90-1107 is a GaAs FET 6-bit digital
attenuator with integral TTL driver. Step size is 0.5
dB providing a 31.5 dB total attenuation range. This
device is in an PQFN plastic surface mount
package. The AT90-1107 is ideally suited for use
where accuracy, fast speed, very low power
consumption and low costs are required. For dual
supply designs without switching noise, use AT90-
0107.
.
Pin Configuration³
Pin No. Function
Pin No. Function
1
C8
17
NC
2
C4
18
NC
3
C2
19
Vcc
4
C1
20
NC
Ordering Information
5
C0.5
21
Cp
6
C16
22
NC
Part Number
AT90-1107
AT90-1107TR
Package
Bulk Packaging
1000 piece reel
7
GND
8
NC
9
NC
10
NC¹
23
Cp
24
NC
25
V_EE2
26
GND
AT90-1107-TB
Sample Test Board
11
GND
27
RF2
Note: Reference Application Note M513 for reel size
information.
12
RF1
13
GND
14
NC
28
GND
29
NC¹
30
V_EE2
15
NC
31
NC
16
NC
32
Vcc
1. Pins 10 and 29 must be isolated.
2. VEE is produced internally and requires a .1 µF cap to GND.
Generated noise is typical of switching DC-DC Converters.
3. The exposed pad centered on the package bottom must be
connected to RF and DC ground. (For PQFN Packages)
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.