AT10-0017_15 Datasheet, PDF (1/4 Pages) M/A-COM Technology Solutions, Inc. – Voltage Variable Absorptive Attenuator

AT10-0017
Voltage Variable Absorptive
Attenuator, 1700 - 2000 MHz
Features
• Input IP3: +31 dBm Min (Full Attenuation Range)
• Input IP3 is 15 -20 dB Better than GaAs
• Linear Operation: +20 dBm Typ.
• 35 dB Dynamic Range (With 30 mA Bias Current)
• Single Control Voltage
• 50 ohm Impedance
• Linear Driver, DR65-0002, Available
• Test Boards are Available
• Tape and Reel Packaging Available
• SOW-16 Package
Description
M/A-COM's AT10-0017 is a PIN diode based voltage
variable attenuator. This device is in a SOW-16,
wide body plastic surface mount package. These
attenuators have linear operating power and input
intercept point levels 15 - 20 dB better than GaAs
FET MMIC voltage variable attenuators. They are
ideally suited for use where low distortion, high linear
operating power and high dynamic range are
required. These devices are optimized for the PCS
frequency band, but exhibit excellent performance
and repeatability over the entire specified frequency
band. The AT10-0017 is ideally suited for wireless
communications systems.
Ordering Information
Part Number
AT10-0017
AT10-0017TR
AT10-0017-TB
DR65-0002-TBP
Package
Tube
1000 piece reel
Unit Mounted on Test Board
Unit with Driver on Test Board
Note: Reference Application Note M513 for reel size
information.
Functional Schematic
Rev. V7
Pin Configuration
Pin No.
1
2
3
4
5
6
7
8
Function
GND
RF
GND
GND
GND
GND
BIAS¹
GND
Pin No.
9
10
11
12
13
14
15
16
Function
GND
RF
GND
GND
GND
GND
BIAS¹
GND
1. Bias currents may be applied to pin 7 or 15. The unused pins
should be isolated.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.