AT-283-PIN_15 Datasheet, PDF (1/4 Pages) M/A-COM Technology Solutions, Inc. – Digital Attenuator

AT-283-PIN
Digital Attenuator
15.5 dB, 5-Bit, TTL Driver, DC-2.0 GHz
Features
• Attenuation: 0.5 dB Steps to 15.5 dB
• Temperature Stability: ± 0.18 dB from –55°C
to +85°C Typical
• Low DC Power Consumption
• Hermetic Surface Mount Package
• Integral TTL Driver
• 50 Ω Nominal Impedance
• Lead-Free CR-12 Package
• 260°C Reflow Compatible
• RoHS* Compliant
Description
M/A-COM’s AT-283-PIN is a GaAs FET 5-bit digital
attenuator with a 0.5 dB minimum step size and 15.5
dB total attenuation. This attenuator and integral
TTL driver is in a hermetically sealed ceramic 16
lead surface mount package. The AT-283-PIN is
ideally suited for use where accuracy, fast switching,
very low power consumption and low intermodula-
tion products are required. Typical applications in-
clude dynamic range setting in precision receiver
circuits and other gain/leveling control circuits. Envi-
ronmental screening is available. Contact the fac-
tory for information.
Ordering Information
Part Number
AT-283-PIN
MAAD-007229-0001TR
MAAD-007229-0001TB
Package
Bulk Packaging
1000 piece reel
Sample Test Board
Note: Reference Application Note M513 for reel size
information.
Functional Schematic
Rev. V7
Pin Configuration
Pin No.
1
2
3
4
5
6
7
8
Function
RF1
GND
GND
GND
GND
GND
GND
RF2
Pin No.
9
10
11
12
13
14
15
16
Function
C5
+5V
-5V
C4
C3
C2
C1
GND
The metal bottom of the case must be connected to RF and DC
ground.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.