AT-119 Datasheet, PDF (1/5 Pages) Tyco Electronics – 2.25 Volt Voltage Variable Absorptive Attenuator - 40 dB, 1.8.2.5 GHz

AT-119
2.25 Volt Voltage Variable Absorptive Attenuator
42 dB, 1.8 - 2.5 GHz
Features
• Single Positive Voltage Control: 0 to +2.25 Volts
• 42 dB Typical Attenuation Range at 2.4 GHz
• Low DC Power Consumption
• SOT-25 Plastic Package
• Tape and Reel Packaging Available
Functional Schematic
5
V_CC
Rev. V9
4
V_CTL
Description
M/A-COM’s AT-119 is a GaAs MMIC voltage
variable absorptive attenuator in a low cost, SOT-25
five-lead, surface mount plastic package. M/A-COM
fabricates the AT-119 with a proven monolithic GaAs
0.5 micron gate process that features full chip
passivation for performance and reliability.
Applications
The AT-119 is ideally suited for applications that
require fine tuning, linear attenuation with voltage,
and very low power consumption.
1
2
RF
GND
100pF
3
RF
100pF
Typical applications for the AT-119 include
automatic gain control circuits in satellite radio
receivers and other wireless receivers.
Ordering Information ¹
Part Number
Package
AT-119
SOT-25 Plastic Package
AT-119TR-3000
3000 piece reel
AT-119SMB
Sample Test Board
(Includes 5 Samples)
1. Reference Application Note M513 for reel size information.
Pin Configuration
Pin
Function
1
RF
2
GND
3
RF
4
V_CTL
5
V_CC
Description
RF (input / output)
Ground
RF (input / output)
Control Voltage
DC Supply Voltage
Absolute Maximum Ratings ^2,3
T_A = +25°C (unless otherwise specified)
Parameter
Absolute Maximum
Input Power
+21 dBm
Supply Voltage V_CC
-1V ≤ V_CC ≤ +8 V
Control Voltage V_CTL
Operating Temperature
-1V ≤ V_CTL ≤ V_CC +0.5 V
-40°C to +85°C
Storage Temperature
-65°C to +150°C
2. Exceeding any one or combination of these limits may cause
permanent damage to this device.
3. M/A-COM does not recommend sustained operation near
these survivability limits.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] / Fax: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macomtech.com for additional data sheets and product information.
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.