AMS-162_15 Datasheet, PDF (1/4 Pages) M/A-COM Technology Solutions, Inc. – Low Noise Amplifier, 12.5 dB Gain, 10 - 100 MHz

AM- / AMC- / AMS-162
Low Noise Amplifier, 12.5 dB Gain,
10 - 100 MHz
Features
 1.1 dB Typical Low Noise Figure @ 50 MHz
 +15 dBm Typical High Output Power @ 50 MHz
 +32 dBm Typical Third Order Intercept @ 50 MHz
 Fully Hermetic Package (AM-162, AMS-162)
Description
M/A-COM’s AM-162 is a coupler feedback amplifier
with high intercept and compression points. The use
of coupler feedback minimizes noise figure and
current in a high intercept amplifier. This amplifier is
packaged in a TO-8-1 package, a surface mount
package and a connectorized version. The ground
plane on the PC board should be configured to
remove heat from under the package. AM-162 are
ideally suited for use where a high intercept, high
reliability amplifier is required.
TO-8-1
Outline Drawing: SMA Connectorized ^*
SF-1
Rev. V5
 Dimensions are inches (millimeters) ±0.015 (0.38) unless otherwise specified.
Absolute Maximum Ratings ¹
Pin Configuration (For AMS-162)
Pin No.
1
2
Function
RF OUT
VDC
Pin No.
3
4
Function
RF IN
GND
Parameter
Max. Input Power
Vbias
Operating Temperature
Storage Temperature
Absolute Maximum
+10 dBm
+15.75 V
-55°C to +85°C
-65°C to +125°C
1
1. Operation of this device above any one of these parameters
1
may cause permanent damage.
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support