English
Language : 

AM40-0023 Datasheet, PDF (1/2 Pages) Tyco Electronics – Ultra Low Noise pHEMT Dual Channel Amplifier, 1.710-1.910 GHz
AM40-0023
Ultra Low Noise pHEMT Dual
Channel Amplifier, 1.710-1.910 GHz
Features
• 0.7 dB Typical Noise Figure
• 14 dB Typical Gain
• DC Decoupled RF Input and Output
• Single Bias Configuration
• SMT Construction
• Dual Channels for Balanced Designs
• Unconditionally Stable—No External Matching
Circuit required
CR-5
Description
M/A-COM’s AM40-0023 is a dual-channel, ultra low noise
amplifier in a surface mount package. Very low noise
figure is achieved by using discrete pHEMT devices
combined with M/A-COM’s glass technology. The
AM40-0023 is designed specifically for use in DCS-1800
and PCS telecommunication applications where less than
1 dB noise figure is required.
Rev. V3
Electrical Specifications:
Bias Conditions: +7V @ 20 mA Typical (each channel,) TA = +25°C, Z0 = 50 Ohms
Parameter
Gain
Gain Flatness
Noise Figure
VSWR Input
VSWR Output
1 dB Compression
Reverse Isolation
Input Third Order
Intercept
Test Conditions
PIN = -20 dBm
PIN = -20 dBm
—
PIN = -20 dBm
PIN = -20 dBm
Input Power
—
—
Frequency
Units
1.710-1.910 GHz
1.710-1.910 GHz
1.710-1.910 GHz
1.710-1.910 GHz
1.710-1.910 GHz
1.710-1.910 GHz
1.710-1.910 GHz
1.710-1.910 GHz
dB
dB
dB
Ratio
Ratio
dBm
dB
dBm
Min.
11
—
—
—
—
-13
20
0
Typ.
14
± 1.0
0.7
2.0:1
2.0:1
-9
25
3
Max.
—
± 1.5
0.9
3.0:1
3.0:1
—
—
—
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.