English
Language : 

AM-177 Datasheet, PDF (1/2 Pages) Tyco Electronics – Cascadable Thin Film Amplifier, 12 dB Gain, 10 - 1000 MHz
AM-177
Cascadable Thin Film Amplifier,
10 dB Gain, 10 - 1000 MHz
Features
• +22 dBm Typical High 1 dB Compression
• +38 dBm Typical High Third Order Intercept
• 1.2:1 Typical VSWR
Description
M/A-COM’s AM-177 is a feedback amplifier with high
intercept and compression points. This amplifier is
packaged in a TO-8 package. Due to the internal
power dissipation the thermal rise should be
minimized. The ground plane on the PC board
should be configured to remove heat from under the
package. AM-177 is ideally suited for use where a
high intercept, high reliability amplifier is required.
TO-8-1
Rev. V4
Electrical Specifications: 1,2 TA = -55°C to +85°C Case Temperature
Parameter
Gain
Frequency Response
Test Conditions
@+25oC
—
Frequency
500 MHz
10 - 1000 MHz
Units
dB
dB
Min.
9.5
—
Typ.
10.0
—
Max.
10.5
±0.5
Gain Variation with
Temperature
1 dB Compression
—
Output Power
10 - 1000 MHz
dB
—
—
+0.8
10 - 1000 MHz
dBm
+20
+22
—
Noise Figure
—
10 - 1000 MHz
dB
—
5.8
8.5
Reverse Transmission
VSWR
—
10 - 1000 MHz
dB
—
-16
-14
—
10 - 1000 MHz
Ratio
—
1.6:1
2.0:1
Output IP2
Output IP3
Two-Tone inputs up to 0 dBm
10 - 1000 MHz
dBm
+42
—
—
Two-Tone inputs up to 0 dBm
10 - 1000 MHz
dBm
+30
—
—
Vbias
Ibias
Power Dissipation
—
Vbias = +15.0 VDC
@ +15 V Bias
—
VDC
+14.5
+15.0
+15.5
—
mA
—
105
115
—
mW
—
1575
—
1. All specifications apply when operated at +15 VDC, with 50 ohms source and load impedance.
2. Heat Sinking: Operation at case temperature above 95°C is not recommended. Heat sinking adequate to dissipate 1.75W must be
provided in use.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.