AM-160_15 Datasheet, PDF (1/4 Pages) M/A-COM Technology Solutions, Inc. – Low Noise Amplifier, 28 dB Gain

AM-160
Low Noise Amplifier, 28 dB Gain,
100 - 600 MHz
Features
 1.6 dB Typical Midband Noise Figure
 +19 dBm Typical 1 dB Compression Point
 +30 dBm Typical Third Order Intercept
Description
M/A-COM’s AM-160 is a coupler feedback amplifier
with high intercept and compression points. The use
of coupler feedback minimizes noise figure and
current in a high intercept amplifier. This amplifier is
packaged in a flatpack with flanges. Due to the metal
flatpack the thermal rise is minimized. The ground
plane on the PC board should be configured to
remove heat from under the package. AM-160 is
ideally suited for use where a high intercept, high
reliability amplifier is required.
FP-9
Rev. V3
Absolute Maximum Ratings ¹
Parameter
Max. Input Power
Vbias
Operating Temperature
Storage Temperature
Absolute Maximum
+10 dBm
+15.75 V
-55°C to +85°C
-65°C to +125°C
1. Operation of this device above any one of these parameters
may cause permanent damage.
Ordering Information
Part Number
AM-160 PIN
Package
Flatpack
Pin Configuration
Pin No.
1
2
3
4
5
Function
RF OUT
GND
GND
GND
VDC
Pin No.
6
7
8
9
10
Function
RF IN
GND
GND
GND
VDC
1
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support