AM-151-AMC-151_15 Datasheet, PDF (1/2 Pages) M/A-COM Technology Solutions, Inc. – Cascadable Amplifier

AM-151/AMC-151
Cascadable Amplifier
10 to 500MHz
Rev. V5
Features
• NOISE FIGURE: 5 dB (TYP.)
• HIGH THIRD ORDER IP: +38 dBM (TYP.)
• P1dB: +21 dBm (TYP.)
Description
The AM-151 amplifier uses a coupler feedback design with high
intercept and compression points. The use of coupler feedback
minimized noise figure and DC current in a high intercept
amplifier. This amplifier is packaged a TO-8 package. Due to
the internal power dissipation, the thermal rise is minimized.
The ground plane on the PC board should be configured to
remove heat from under the package. AM-151 is ideally suited
for use where a high intercept high reliability amplifier is
required.
Ordering Information
Part Number
AM-151-PIN^*
Package
TO-8-1
AMC-151- SMA**
SMA Connectorized
*Mounting kit part number AU00071 required for PCB application
**SMA Connectorized part is not RoHs compliant.
Product Image
Absolute Maximum Ratings
Parameter
Absolute Maximum
Maximum Input Power
DC Voltage
Continuous Input Power
Operating Temperature
Storage Temperature
+20 dBm
+15.75 V
+18 dBm
-55º to +85ºC
-65º to +125ºC
Electrical Specifications: Z₀ = 50Ω, V_CC = +15 V_DC**
Parameter
Gain
Frequency Response
Gain Variation with
Temperature
1 dB Compression
Noise Figure (max)
Reverse Transmission
VSWR
Output IP²
Output IP³
V bias
I bias
Power Dissiapation
Test Conditions
Frequency
@ +25^oC
50 MHz
5-500 MHz
5-500 MHz
Output Power
5-500 MHz
10-500 MHz
5-500 MHz
Two-tone inputs up to +10 dBm
Two-tone inputs up to +10 dBm
5-500 MHz
5-500 MHz
5-500 MHz
5-500 MHz
V bias = +15 Vdc
@ +15 V Bias
Units
MHz
dB
dB
dBm
dBm
dB
dB
Ratio
dBm
dBm
dBm
mA
mW
Min.
11.5
+19
+20
+48
+34
+14.5
Typ.
12.0
-16.0
+15.0
85
1275
Max.
12.5
±1.0
±0.8
7.0
-13.0
2.0:1
+15.5
100
***Heat Sinking: Operation at case temperature above +95^oC is not recommended. Heat sinking adequate to dissipate 1.3 W must be provided in use.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.