AM-147-AMC-147_15 Datasheet, PDF (1/2 Pages) M/A-COM Technology Solutions, Inc. – Cascadable Amplifier

AM-147 / AMC-147
Cascadable Amplifier
10 to 500MHz
Features
• HIGH POWER OUTPUT: +21 dBm (TYP.)
• HIGH THIRD ORDER IP3: +33 dBm (TYP.)
• HIGH EFFICIENCY: 52 mA (TYP.) @ +15 Vdc
Product Image
Description
M/A-COM’s AM-147 is a coupler feedback amplifier with high
intercept and compression points. The use of coupler feedback
minimizes noise figure and current in a high intercept amplifier.
This amplifier is packaged in a TO-8 package. Due to the inter-
nal power dissipation the thermal rise minimized. The ground
plane on the PC board should be configured to remove heat from
under the package. AM-147 is ideally suited for use where a high
intercept, high reliability amplifier is required.
Ordering Information
Part Number
AM-147-PIN
AMC-147- SMA *
Package
TO-8
Connectorized
* SMA Connectorized part is not RoHs compliant.
Rev. V6
Electrical Specifications: Z₀ = 50Ω, V_CC = +15 V_DC
Absolute Maximum Ratings
Parameter
Frequency
Small Signal Gain (min)
Gain Flatness (max)
Reverse Isolation
Noise Figure (max)
Power Output
@ 1 dB comp. (min)
IP3
Units
MHz
dB
dB
dB
dB
dBm
dBm
Typical
25ºC
3-500
17.0
±0.4
20.0
3.4
20.0
+31
Guaranteed
0º to 50ºC -54º to +85ºC*
5-500
5-500
16.0
15.5
±0.8
±1.0
16.0
4.2
4.7
19.0
18.5
Parameter
Absolute
Maximum
Storage Temperature -62ºC to +150ºC
Case Temperature
125ºC
DC Voltage
+17 V
Continuous Input Power
+13 dBm
Short Term Input power
(1 minute max.)
100 mW
Peak Power (3 µsec max.)
0.5 W
“S” Series Burn-In
Temperature (case)
125ºC
Thermal Data: V_CC = +15 V_DC
IP2
dBm
+40
Parameter
Rating
Second Order Harmonic IP dBm
+46
Thermal Resistance θ_jc
143ºC/W
VSWR Input / Output (max)
DC Current @ 15 Volts (max) mA
1.7:1 / 1.7:1 1.9:1 / 1.9:1
52
56
2.0:1 / 2.0:1
58
Transistor Power Dissipation P_d
Junction Temperature Rise
Above Case T_jc
0.47 W
68ºC
* Over temperature performance limits for part number AMC-147, guaranteed from 0^oC to +50^oC only.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.