AM-131-PIN Datasheet, PDF (1/2 Pages) M/A-COM Technology Solutions, Inc. – Product Type: Broadband RF Amplifier Frequency: 5 to 500 MHz

AM-131-PIN
Product Type: Broadband RF Amplifier
Frequency: 5 to 500 MHz
Rev. V4
Features
• HIGH DYNAMIC RANGE: +116 dBm (1 MHz Band)
• HIGH OUTPUT POWER: +19 dBm (TYP.)
• HIGH THIRD ORDER I.P. + 34.0 dBm (TYP.)
• LOW NOISE: 4.0 dB (TYP.)
Description
The AM-131-PIN RF amplifier is a discrete thin film hybrid
design, which incorporates the use of thin film manufacturing
processes for accurate performance and high reliability. This
single stage bipolar transistor feedback amplifier design
displays impressive performance over a broadband
frequency range. An active DC biasing network is used for
temperature-stable performance, in addition to an RF Choke,
used for power supply decoupling.
Ordering Information
Product Image
Part Number
AM-131 PIN ⁴
Package
TO-8-1
4. Mounting kit part number AU00071 required for PCB applications.
Electrical Specifications: Z₀ = 50Ω, V_CC = +15 V_DC
Absolute Maximum Ratings
Parameter
Frequency
Small Signal Gain (min)
Gain Flatness (max)
Reverse Isolation
Noise Figure (max)
Power Output
@ 1 dB comp. (min)
IP3
IP2
Second Order Harmonic IP
VSWR Input / Output (max)
DC Current @ 15 Volts (max)
Units
MHz
dB
dB
dB
dB
Typical
25ºC
5-500
11.5
±0.3
16
4.0
Guaranteed
0º to 50ºC -54º to +85ºC*
5-500
5-500
10.0
9.5
±0.7
±1.0
5.0
5.5
dBm
19.0
18.0
17.5
dBm
+34
dBm
+48
dBm
+54
1.5:1 / 1.5:1 1.9:1 / 1.9:1
mA
65
69
2.0:1 / 2.0:1
72
Parameter
Storage Temperature
Case Temperature
DC Voltage
Continuous Input Power
Short Term Input power
(1 minute max.)
Peak Power (3 µsec max.)
Absolute
Maximum
-62ºC to +125ºC
+125ºC
+17 V
13 dBm
50 mW
0.5 W
Thermal Data: V_CC = +15 V_DC
Parameter
Rating
Thermal Resistance θjc
Transistor Power Dissipation Pd
Junction Temperature Rise Above
Case Tjc
75ºC/W
0.651 W
49ºC
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.