A66-SMA66 Datasheet, PDF (1/2 Pages) M/A-COM Technology Solutions, Inc. – Cascadable Amplifier

A66 / SMA66
Cascadable Amplifier
10 to 1200 MHz
Rev. V3
Features
• HIGH GAIN - TWO STAGES: 23.5 dB (TYP.)
• LOW NOISE: <3.8 dB (TYP.)
• HIGH OUTPUT LEVEL:+15.0 dBm (TYP.)
• WIDE POWER SUPPLY RANGE: 5 TO 15 VOLTS
Description
The A66 RF amplifier is a discrete hybrid design, which uses
thin film manufacturing processes for consistent performance
and high reliability.
This 2 stage bipolar transistor feedback amplifier design
displays impressive performance over a broadband
frequency range. An active DC biasing network insures
temperature-stable performance.
Both TO-8 and Surface Mount packages are hermetically
sealed, and MIL-STD-883 environmental screening is available.
Ordering Information
Product Image
Part Number
A66
SMA66
CA66 **
Package
TO-8
Surface Mount
SMA Connectorized
** The connectorized version is not RoHs compliant.
Electrical Specifications: Z₀ = 50Ω, V_CC = +15 V_DC
Absolute Maximum Ratings
Parameter
Units
Typical
25ºC
Guaranteed
0º to 50ºC -54º to +85ºC*
Frequency
MHz
5-1250
10-1200
10-1200
Small Signal Gain (min)
dB
23.5
22.0
21.0
Gain Flatness (max)
dB
±0.3
±0.7
±1.0
Reverse Isolation
dB
32
Noise Figure (max)
dB
4.0
5.0
5.5
Power Output
@ 1 dB comp. (min)
dBm
15.0
14.0
13.5
IP3
dBm
+28
IP2
dBm
+40
Second Order Harmonic IP dBm
+45
VSWR Input / Output (max)
1.5:1 / 1.5:1 1.9:1 / 1.9:1 2.0:1 / 2.0:1
DC Current @ 15 Volts (max) mA
64
67
70
Parameter
Absolute
Maximum
Storage Temperature -62ºC to +125ºC
Case Temperature
+125ºC
DC Voltage
+17 V
Continuous Input Power
10 dBm
Short Term Input power
(1 minute max.)
100 mW
Peak Power (3 µsec max.)
0.5 W
“S” Series Burn-In
Temperature (case)
+125ºC
Thermal Data: V_CC = +15 V_DC
Parameter
Rating
Thermal Resistance θ_jc
Transistor Power Dissipation P_d
Junction Temperature Rise
Above Case T_jc
145ºC/W
0.405 W
59ºC
* Over temperature performance limits for part number CA66, guaranteed from 0^oC to +50^oC only.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.