A63 Datasheet, PDF (1/2 Pages) Tyco Electronics – 5 TO 1000 MHz CASCADABLE AMPLIFIER

A63 / SMA63
Cascadable Amplifier
5 to 1000 MHz
Features
• LOW NOISE: 3.0 dB (TYP.)
• MEDIUM THIRD ORDER I.P.: +15 dBm (TYP.)
• HIGH GAIN: 16 dB (TYP.)
Description
The A63 RF amplifier is a discrete hybrid design, which uses
thin film manufacturing processes for accurate performance
and
high reliability.
This single stage bipolar transistor feedback amplifier design
displays impressive performance over a broadband frequency
range. Both TO-8 and Surface Mount packages are
Hermetically sealed, and MIL-STD-883 environmental screen-
ing is available.
Ordering Information
Product Image
Rev. V3
Part Number
A63
SMA63
CA63 **
Package
TO-8
Surface Mount
SMA Connectorized
** The connectorized version is not RoHs compliant.
Electrical Specifications: Z₀ = 50Ω, V_CC = +15 V_DC
Absolute Maximum Ratings
Parameter
Units
Typical
25ºC
Guaranteed
0º to 50ºC -54º to +85ºC*
Frequency
MHz
1-1100
5-1000
5-1000
Small Signal Gain (min)
dB
16.0
15.0
14.5
Gain Flatness (max)
dB
±0.3
±0.7
±1.0
Reverse Isolation
dB
20
Noise Figure (max)
dB
3.0
4.0
4.5
Power Output
@ 1 dB comp. (min)
dBm
4.0
2.0
1.5
IP3
dBm
+15
IP2
dBm
+20
Second Order Harmonic IP dBm
+25
VSWR Input / Output (max)
1.4:1 / 1.4:1 1.9:1 / 1.9:1 2.0:1 / 2.0:1
DC Current @ 15 Volts (max) mA
14
16
18
Parameter
Absolute
Maximum
Storage Temperature -62ºC to +125ºC
Case Temperature
+125ºC
DC Voltage
+18 V
Continuous Input Power
13 dBm
Short Term Input power
(1 minute max.)
50 mW
Peak Power (3 µsec max.)
0.5 W
“S” Series Burn-In
Temperature (case)
+125ºC
Thermal Data: V_CC = +15 V_DC
Parameter
Rating
Thermal Resistance θ_jc
Transistor Power Dissipation P_d
Junction Temperature Rise
Above Case T_jc
170ºC/W
0.092 W
16ºC
* Over temperature performance limits for part number CA63, guaranteed from 0^oC to +50^oC only.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.