A514 Datasheet, PDF (1/2 Pages) Tyco Electronics – Cascadable Amplifier 10 to 500 MHz

A514 / SMA514
Cascadable Amplifier
10 to 500 MHz
Features
• HIGH GAIN: 28 dB (TYP.)
• LOW NOISE: 4.0 dB (TYP.)
• HIGH OUTPUT POWER: +19 dBm (TYP.)
Product Image
Description
The A514 RF amplifier is a discrete hybrid design, which uses
thin film manufacturing processes for accurate performance
and high reliability.
This 2 stage bipolar transistor feedback amplifier design
displays impressive performance over a broadband frequency
range. An active DC biasing network insures temperature-
stable performance.
Both TO-8 and Surface Mount packages are hermetically
sealed, and MIL-STD-883 environmental screening is available.
Ordering Information
Rev. V1
Part Number
A514
SMA514
CA514
Package
TO-8
Surface Mount
SMA Connectorized
Electrical Specifications: Z₀ = 50Ω, V_CC = +15 V_DC
Absolute Maximum Ratings
Parameter
Frequency
Small Signal Gain (min)
Gain Flatness (max)
Reverse Isolation
Noise Figure (max)
Power Output
@ 1 dB comp. (min)
IP3
IP2
Units
Typical
25ºC
MHz
3-600
dB
28.0
dB
±0.3
dB
36
dB
4.0
dBm
19.0
dBm
+32
dBm
+50
Guaranteed
0º to 50ºC -54º to +85ºC*
5-500
5-500
26.5
26.0
±0.5
±0.8
4.7
5.2
18.5
17.0
Parameter
Absolute
Maximum
Storage Temperature -62ºC to +125ºC
Case Temperature
+110ºC
DC Voltage
+17 V
Continuous Input Power
+13 dBm
Short Term Input power
(1 minute max.)
50 mW
Peak Power (3 µsec max.)
0.5 W
“S” Series Burn-In
Temperature (case)
+125ºC
Thermal Data: V_CC = +15 V_DC
Parameter
Rating
Second Order Harmonic IP dBm
+55
VSWR Input / Output (max)
1.4:1 / 1.4:1 1.7:1 / 1.7:1
DC Current @ 15 Volts (max) mA
96
103
1.8:1 / 1.8:1
110
Thermal Resistance θ_jc
Transistor Power Dissipation P_d
Junction Temperature Rise
Above Case T_jc
150ºC/W
0.36W
+55ºC
* Over temperature performance limits for part number CA514, guaranteed from 0^oC to +50^oC only.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] / Fax: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macomtech.com for additional data sheets and product information.
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.