English
Language : 

A511-SMA511 Datasheet, PDF (1/2 Pages) M/A-COM Technology Solutions, Inc. – Cascadable Amplifier
A511 / SMA511
Cascadable Amplifier
10 to 500 MHz
Rev. V3
Features
• HIGH POWER OUTPUT: +21 dBm (TYP.)
• HIGH THIRD ORDER IP3: +33 dBm (TYP.)
• HIGH EFFICIENCY: 52 mA (TYP.) @ +15 Vdc
• AVAILABLE IN BOTH TO-8 and SMTO-8 PACKAGES
Description
The A511 RF amplifier is a discrete hybrid design, which uses
thin film manufacturing processes for accurate performance and
high reliability.
This single stage bipolar transistor feedback amplifier design
displays impressive performance over a broadband frequency
range. Use of an impedance transformer offers the benefit of
high dynamic range and high efficiency.
Both TO-8 and Surface Mount packages are hermetically
sealed, and MIL-STD-883 environmental screening is available.
Ordering Information
Product Image
Part Number
A511
MAAM-008735-SMA511
CA511
Package
TO-8
Surface Mount
SMA Connectorized **
** The connectorized version is not RoHs compliant.
Electrical Specifications: Z0 = 50Ω, VCC = +15 VDC
Absolute Maximum Ratings
Parameter
Frequency
Small Signal Gain (min)
Gain Flatness (max)
Reverse Isolation
Noise Figure (max)
Power Output
@ 1 dB comp. (min)
IP3
Units
MHz
dB
dB
dB
dB
dBm
dBm
Typical
25ºC
5-500
17.0
±0.4
16
3.4
20
+33
Guaranteed
0º to 50ºC -54º to +85ºC*
10-500
10-500
16.0
15.5
±0.8
±1.0
4.2
4.7
18.5
18.0
Parameter
Absolute
Maximum
Storage Temperature -62ºC to +150ºC
Case Temperature
125ºC
DC Voltage
+17 V
Continuous Input Power
+13 dBm
Short Term Input power
(1 minute max.)
100 mW
Peak Power (3 µsec max.)
0.5 W
“S” Series Burn-In
Temperature (case)
125ºC
Thermal Data: VCC = +15 VDC
IP2
dBm
+40
Parameter
Rating
Second Order Harmonic IP dBm
+46
VSWR Input / Output (max)
1.7:1 / 1.7:1 1.9:1 / 1.9:1
DC Current @ 15 Volts (max) mA
52
56
2.0:1 / 2.0:1
58
Thermal Resistance θjc
Transistor Power Dissipation Pd
Junction Temperature Rise
Above Case Tjc
143ºC/W
0.47 W
68ºC
* Over temperature performance limits for part number CA511, guaranteed from 0oC to +50oC only.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.