A4012-SMA4012 Datasheet, PDF (1/2 Pages) M/A-COM Technology Solutions, Inc. – Cascadable Amplifier

A4012 / SMA4012
Cascadable Amplifier
1000 to 4000 MHz
Features
• WIDE BANDWIDTH: 1.0 to 4.0 GHz (TYP.)
• HIGH GAIN: 18 dB (TYP.)
• MEDIUM OUTPUT POWER: +15.5 dBm (TYP.)
• LOW NOISE FIGURE: 3.5 dB (TYP.)
Product Image
Description
The A4012 microwave amplifier is a discrete hybrid design,
which uses thin film manufacturing processes for accurate
performance and high reliability.
This two stage GaAs FET feedback amplifier design displays
impressive performance characteristics over a broadband
frequency range.
Both TO-8 and Surface Mount packages are hermetically
sealed, and MIL-STD-883 environmental screening is available.
Ordering Information
Rev. V3
Part Number
A4012
SMA4012
MAAM-008738-CA4012
Package
TO-8
Surface Mount
SMA Connectorized **
** The connectorized version is not RoHs compliant.
Electrical Specifications: Z₀ = 50Ω, V_CC = +5 V_DC
Absolute Maximum Ratings
Parameter
Frequency
Small Signal Gain (min)
Gain Flatness (max)
Reverse Isolation
Noise Figure (max)
Power Output
@ 1 dB comp. (min)
IP3
Units
GHz
dB
Typical
25ºC
0.8-4.5
18.0
dB
±0.4
dB
36
dB
3.5
dBm
15.5
dBm
+26
Guaranteed
0º to 50ºC -54º to +85ºC*
1.0-4.0
1.0-4.0
17.5
17.0
±0.6
±0.8
4.0
4.5
14.5
14.0
Parameter
Absolute
Maximum
Storage Temperature -62ºC to +125ºC
Case Temperature
+125ºC
DC Voltage
+6 V
Continuous Input Power
+13 dBm
Short Term Input power
(1 minute max.)
100 mW
Peak Power (3 µsec max.)
0.25 W
“S” Series Burn-In
Temperature (case)
+125ºC
Thermal Data: V_CC = +5 V_DC
IP2
dBm
+34
Parameter
Rating
Second Order Harmonic IP dBm
+49
VSWR Input / Output (max)
1.7:1 / 1.7:1 1.9:1 / 1.9:1
DC Current @ 5 Volts (max) mA
65
73
2.0:1 / 2.0:1
78
Thermal Resistance θ_jc
Transistor Power Dissipation P_d
Junction Temperature Rise
Above Case T_jc
132ºC/W
0.171 W
+24ºC
* Over temperature performance limits for part number CA4012, guaranteed from 0^oC to +50^oC only.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.