A4011-SMA4011 Datasheet, PDF (1/2 Pages) M/A-COM Technology Solutions, Inc. – Cascadable Amplifier

A4011 / SMA4011
Cascadable Amplifier
1000 to 4000 MHz
Rev. V3
Features
• LOW NOISE FIGURE: 2.0 dB (TYP.)
• MEDIUM OUTPUT POWER: +18.3 dBm (TYP.)
• HIGH EFFICIENCY: 65 mA (TYP.) @ +5 Vdc
• PHEMT AMPLIFIER
Product Image
Description
The A4011 microwave amplifier is a discrete hybrid design,
which uses thin film manufacturing processes for accurate
performance and high reliability.
This single stage PHEMT feedback amplifier design displays
impressive performance characteristics over a broadband
frequency range.
Both TO-8 and Surface Mount packages are hermetically
sealed, and MIL-STD-883 environmental screening is available.
Ordering Information
Part Number
A4011
SMA4011
CA4011 **
Package
TO-8
Surface Mount
SMA Connectorized
** The connectorized version is not RoHs compliant.
Electrical Specifications: Z₀ = 50Ω, V_CC = +5 V_DC
Absolute Maximum Ratings
Parameter
Frequency
Small Signal Gain (min)
Gain Flatness (max)
Reverse Isolation
Noise Figure (max)
Power Output
@ 1 dB comp. (min)
Units
GHz
dB
Typical
25ºC
0.8-4.5
15.5
dB
±0.4
dB
16
dB
2.0
dBm
18.3
Guaranteed
0º to 50ºC -54º to +85ºC*
1.0-4.0
13.0
1.0-4.0
12.5
±0.7
±1.0
2.7
3.2
16.5
16.0
Parameter
Absolute
Maximum
Storage Temperature -62ºC to +150ºC
Case Temperature
+125ºC
DC Voltage
+7 V
Continuous Input Power
+13 dBm
Short Term Input power
(1 minute max.)
100 mW
Peak Power (3 µsec max.)
0.25 W
“S” Series Burn-In
Temperature (case)
+125ºC
IP3
dBm
+29
IP2
dBm
+45
Second Order Harmonic IP dBm
+50
VSWR Input / Output (max)
1.4:1 / 1.4:1 2.0:1 / 1.9:1
DC Current @ 5 Volts (max) mA
65
70
2.2:1 / 2.0:1
75
Thermal Data: V_CC = +5 V_DC
Parameter
Rating
Thermal Resistance θ_jc
Transistor Power Dissipation P_d
Junction Temperature Rise
Above Case T_jc
47ºC/W
0.2 W
+9.4ºC
* Over temperature performance limits for part number CA4011, guaranteed from 0^oC to +50^oC only.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.