A26_V5 Datasheet, PDF (1/2 Pages) M/A-COM Technology Solutions, Inc. – Cascadable Amplifier

A26/SMA26
Cascadable Amplifier
10 to 1500 MHz
Features
• HIGH GAIN - TWO STAGES: 20.5 dB (TYP.)
• HIGH OUTPUT LEVEL: +15 dBm (TYP.)
• LOW VSWR: <1.4:1 (TYP.)
Product Image
Rev. V5
Description
The A26 RF amplifier is a discrete hybrid design, which uses
thin film manufacturing processes for consistent performance
and high reliability.
This 2 stage bipolar transistor feedback amplifier design displays
impressive performance over a broadband frequency range. An
active DC biasing network insures temperature-stable
**
performance. Both TO-8 and Surface Mount packages are her-
metically sealed, and MIL-STD-883 environmental screening is
available.
Ordering Information
Part Number
A26
SMA26
CA26
Package
TO-8
Surface Mount
SMA Connectorized **
** The connectorized version is not RoHs compliant.
Electrical Specifications: Z₀ = 50Ω, V_CC = +15 V_DC
Absolute Maximum Ratings
Parameter
Frequency
Small Signal Gain (min)
Typical
Units
25ºC
MHz 10-1600²
dB
20.5
Guaranteed
0º to 50ºC -54º to +85ºC¹
10-1500²
10-1500²
19.0
18.5
Parameter
Storage Temperature
Case Temperature
DC Voltage
Absolute
Maximum
-62ºC to +125ºC
+125ºC
+17 V
Gain Flatness (max)
dB
±0.4
±0.6
Reverse Isolation
dB
28
Noise Figure (max)
dB
5.0
5.5
±0.8
Continuous Input Power
+10 dBm
Short Term Input power
(1 minute max.)
100 mW
6.0
Peak Power (3 µsec max.)
0.5 W
Power Output
10-1000MHz
@ 1 dB comp. (min)
dBm 14.0
+13.0
+12.50
“S” Series Burn-In
Temperature (case)
+125ºC
Power Output
1000-1500MHz
@ 1 dB comp. (min)
dBm 16.0
+15.0
+14.50
Thermal Data: V_CC = +15 V_DC
IP3
IP2
Second Order Harmonic IP
dBm
dBm
dBm
VSWR Input / Output (max)
+27
+45
+51
1.4:1
/ 1.4:1
1.7:1
/ 1.7:1
2.0:1
/ 2.3:1
Parameter
Thermal Resistance θ_jc
Transistor Power Dissipation P_d
Junction Temperature Rise
Above Case T_jc
Rating
145ºC/W
0.394 W
+57ºC
DC Current @ 15 Volts
(max)
mA
64
67
70
1. Over temperature performance limits for part number CA26, guaranteed from 0^oC to +50^oC only.
2. Specifications apply across frequency range unless otherwise specified
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.