A1212_15 Datasheet, PDF (1/5 Pages) M/A-COM Technology Solutions, Inc. – Cascadable Amplifier 100 - 1200 MHz

A1212 / SMA1212 / CA1212
Cascadable Amplifier
100 - 1200 MHz
Rev. V4
Features
 1.8 dB Noise Figure
 19 dBm Output Power
 20% Power Added Efficiency (PAE)
Product Image
Description
The A1212 RF amplifier is a discrete hybrid design,
which uses thin film manufacturing processes for
accurate performance and high reliability.
This feedback amplifier design displays impressive
performance characteristics over a broadband
frequency range. An RF choke is used for DC power
supply decoupling.
Both the TO-8 and Surface Mount packages
are hermetically sealed, and MIL-STD-883
environmental screening is available.
Ordering Information
Part Number
A1212
Package
TO-8
SMA1212
CA1212¹
Surface Mount
SMA Connectorized
1. The connectorized version is not RoHS compliant.
Electrical Specifications²: Z₀ = 50 Ω, V_CC = 5 V_DC
Parameter
Units
Typical
25ºC
Guaranteed
0º to 50ºC
-54º to +85ºC*
Frequency
GHz
0.1-1.2
0.1-1.2
0.1-1.2
Small Signal Gain (min.)
dB
14.0
12.5
11.5
Gain Flatness (max.)
dB
±0.6
±1.0
±1.2
Reverse Isolation
dB
23
—
—
Noise Figure (max.)
dB
1.8
2.3
2.7
Power Output
@ 1 dB comp. (min.)
dBm
19.0
17.0
16.0
IP3
dBm
29
—
—
IP2
dBm
40
—
—
Second Order Harmonic IP
dBm
46
—
—
VSWR Input / Output (max.)
Ratio
1.8:1 / 1.8:1
2.1:1 / 2.1:1
2.3:1 / 2.3:1
DC Current @ 5 Volts (max.)
mA
70
75
85
2. Over temperature performance limits for part number CA1212, guaranteed from 0^oC to +50^oC only.
1
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support