A101 Datasheet, PDF (1/2 Pages) Tyco Electronics – 5 TO 100 MHZ TO-8 CASCADABLE AMPLIFIER

A101 / SMA101
Cascadable Amplifier
5 to 100 MHz
Rev. V2
Features
• HIGH OUTPUT POWER: +23 dBm (TYP.)
• HIGH THIRD ORDER IP: +36 dBm (TYP.)
• HIGH SECOND ORDER IP: +64 dBm (TYP.)
• LOW NOISE FIGURE: 3 dB (TYP.)
Description
The A101 RF amplifier is a discrete hybrid design, which uses
thin film manufacturing processes for accurate performance and
high reliability.
This push-pull cascode design offers the benefits of low noise
figure and high linearity.
Both TO-8 and Surface Mount packages are hermetically
sealed, and MIL-STD-883 environmental screening is available.
Ordering Information
Product Image
Part Number
A101
SMA101
MAAM-008734-0CA101
Package
TO-8B
Surface Mount
SMA Connectorized **
** The connectorized version is not RoHs compliant.
Electrical Specifications: Z₀ = 50Ω, V_CC = +12 V_DC
Absolute Maximum Ratings
Parameter
Frequency
Small Signal Gain (min)
Gain Flatness (max)
Reverse Isolation
Noise Figure (max)
Power Output
@ 1 dB comp. (min)
IP3
Units
MHz
dB
dB
dB
dB
dBm
dBm
Typical
25ºC
3-120
17.0
±0.3
20
3.0
23.0
+36
Guaranteed
0º to 50ºC -54º to +85ºC*
5-100
5-100
16.0
15.5
±0.4
±0.4
3.5
4.0
22.0
20.5
Parameter
Absolute
Maximum
Storage Temperature -62ºC to +125ºC
Case Temperature
+125ºC
DC Voltage
+15 V
Continuous Input Power
+13 dBm
Short Term Input power
(1 minute max.)
50 mW
Peak Power (3 µsec max.)
0.5 W
“S” Series Burn-In
Temperature (case)
+85ºC
Thermal Data: V_CC = +12 V_DC
IP2
dBm
+64
Parameter
Rating
Second Order Harmonic IP dBm
+70
VSWR Input / Output (max)
1.2:1 / 1.5:1 1.7:1 / 1.7:1
DC Current @ 12 Volts (max) mA
105
115
1.9:1 / 1.9:1
125
Thermal Resistance θ_jc
Transistor Power Dissipation P_d
Junction Temperature Rise
Above Case T_jc
54ºC/W
0.7 W
+38ºC
* Over temperature performance limits for part number CA101, guaranteed from 0^oC to +50^oC only.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.