English
Language : 

906R5K-SP03 Datasheet, PDF (1/3 Pages) M/A-COM Technology Solutions, Inc. – Binary Capacitor
906R5K-SP03
Binary Capacitor
Features
Die
 High Reliability Silicon Nitride-Oxide Dielectric
 Low Loss
 Long Term Reliability and Stability
 RoHS* Compliant
Description
The 906R5K-SP03 binary capacitor is designed to
facilitate bread-boarding or to use where a trimming
capability is required. These devices feature the
same dielectric layer and bonding surfaces as our
9000 and 9100 series chip capacitors. By
connecting the pads in parallel the capacitance
values are additive, so many combinations are
possible.
These devices are ideally suited for use in
applications requiring a trimming capability or bread-
boarding.
Rev. V2
Electrical Specifications: TC = +25°C (unless otherwise specified)
Part #
Reverse Breakdown
VB
IR = 10 µA
V
Min.
Min.
Max.
Capacitance
CJ
VR = 0 V
pF
Min.
Max.
Min.
Max.
906R5K-SP03
50
5.85
7.15
0.06
0.12
0.06
0.12
Absolute Maximum Ratings5,6
Parameter
Moisture Sensitivity Level
Absolute Maximum
1
Operating Temperature
-55°C to +150°C
Storage Temperature
-65°C to +200°C
5. Exceeding any one or combination of these limits may cause
permanent damage to this device.
6. MACOM does not recommend sustained operation near these
survivability limits.
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
These electronic devices are sensitive to
electrostatic discharge (ESD) and can be damaged
by static electricity. Proper ESD control techniques
should be used when handling these Class 0 (HBM)
devices.
* Restrictions on Hazardous Substances, European Union Directive 2011/65/EU.
1
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support