2087-6001-13 Datasheet, PDF (1/1 Pages) M/A-COM Technology Solutions, Inc. – Point Contact Detector 10 MHz to 18 GHz

2087-6001-13
Point Contact Detector
10 MHz to 18 GHz
Features
• Broadband Frequency Ranges
• No Bias Required
• Flat Frequency Response
• Passivated Stainless Steel Finish
Mechanical Outline Drawing
Rev. V5
Specifications
Parameter
Flatness (Maximum)
VSWR (Typical)
Maximum Power
Output Polarity
Video Resistance
Temperature Range
Specification
± 0.75 dB, 10 MHz to 4 GHz
± 1.25 dB, 4 MHz to 8 GHz
± 1.5 dB, 10 MHz to 12 GHz
± 2.5 dB, 10 MHz to 18 GHz
1.7:1, 10 MHz to 4 GHz
2.7:1, 10 MHz to 8 GHz
3.5:1, 10 MHz to 12 GHz
4.0:1, 10 MHz to 18 GHz
100 mW
Positive ⁴
6 k Ohms Typical ²
-65°C to +100°C
Detector
Part Number
2087-6001-00
Frequency
Range ¹ (GHz)
10 MHz to 4 GHz
10 MHz to 8 GHz
10 MHz to 12 GHz
10 MHz to 18 GHz
Open Circuit
Voltage
Sensitivity ²
(mV/mW) Min.
400
Tangential
Output
Sensitivity ³ Capacitance
(-dBm) Min. (pF) Typical
45
12
Dimension A
Inches
1.55
mm
39.4
500
45
12
1.55
39.4
700
45
12
1.55
39.4
800
45
12
1.55
39.4
1. Usable to 20 GHz
2. For RF power levels below –20 dBm, and with an open circuit load.
3. With video amplifier of 1 MHz bandwidth and 2 dB noise figure.
4. For Negative Output change suffix to -00.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.