1623535-1 Datasheet, PDF (1/3 Pages) M/A-COM Technology Solutions, Inc. – Type CRG Series

Key Features
n Thick film resistors with
a high power to size
ratio,ideally suited to
industrial and general
purpose use.
A range from 1 ohm to
10M and tolerances of
1% and 5%. Also
including zero ohm links.
n Suitable for most
applications, including
high frequency
operation, owing to the
short lead structure and
low capacitance.
n Seven Package Sizes
n Terminal finish: Matte Sn
n MSL Level 2
Thick Film Chip Resistors
Type CRG Series
Precious metal terminations are screen printed onto a ceramic base and fired. The
resistive element is screen printed and fired and the passivation layer added. Each
resistor is trimmed to tolerance by laser. The pre-scribed tile is broken into strips, the end
plating is fired on and the strips broken into individual components. Final termination is
made by electroplating.
Characteristics – Electrical
Rated Power @ 70 °C (W)
Resistance Range Min
(Ohms)
Max
Tolerance (%)
Code letter
Selection Series
Temp. Coefficient (ppm/°C)
0201
0402
0603
0805
0.05
0.063
0.1
0.125
10 1 11 10 1 11 1 101 1 11 1 101 1 11
1M0 10 1M0 2M0 10 3M3 100 1M0 10 10M 100 1M0 10 10M
1
5
51
5
5 1 15 5115 5
F
J
JF
J
J FFJ JFFJ J
E24 E24 E24 E24 E24 E24 E24 E24 E24 E24 E24 E24 E24 E24
E96
E96
E96
E96
±200 ±400 ±200 ±100 ±400 ±200 ±200 ±100 ±200 ±200 ±200 ±100 ±400 ±200
Rated Power @ 70 °C (W)
Resistance Range Min
Ohms
Max
Tolerance (%)
Code letter
Selection Series
Temp. Coefficient (ppm/°C)
1206
2010
2512
0.25
0.5
1
1 101 1 11 1 101 1 11 1 101 1 11
100 1M0 10 10M 100 1M0 10 10M 100 1M0 10 10M
11
5
511
55
1
15
5
FF J
JFF
J
J
F
F
J
J
E24 E24 E24 E24 E24 E24 E24 E24 E24 E24 E24 E24
E96
E96
E96
±200 ±100 ±400 ±200 ±200 ±100 ±400 ±200 ±200 ±100 ±400 ±200
Working Voltage (V)
Max. Overload Voltage (V)
Operating Temp. Range (°C)
Climatic Category (°C)
Insulation Resistance Dry
Min (Mohms)
Stability (%)
Zerohm (A) Current Max
Resistance Max
0201
25
50
0.5
<50 mOhm
0402
50
100
1
0603
50
100
0805
150
300
-55 to +125
55/125/56
1000
1206
200
400
3
1
2
2
<50 mOhm
2010
200
400
2512
200
400
2
2
1773204 CIS WR 03/2012
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
For email, phone or live chat, go to: te.com/help