LY8010_13 Datasheet, PDF (1/21 Pages) Lyontek Inc. – 3.3 W Mono Filterless Class D Audio power Amplifier

®
Rev. 2.0
LY8010
3.3 W Mono Filterless Class D Audio power Amplifier
FEATURES
„ 3.3 W Into 4Ω from 5.5V power supply at
THD+N = 10% (Typ.).
„ 2.0 W Into 8Ω from 5.5V power supply at
THD+N = 10% (Typ.).
„ 2.5V~5.5V Power supply.
„ Low shutdown current.
„ Low quiescent current.
„ Minimum external components.
„ No output filter required for inductive loads.
„ Output pin short-circuit protection and
automatic recovery.
(short to output pin, short to GND, short to VDD).
„ Low noise during turn-on and turn-off transitions.
„ Lead free and green package available.
(RoHS Compliant)
„ 8-pin DFN package.
GENERAL DESCRIPTION
The LY8010 is a high efficiency, 3.3 W mono class D
audio power amplifier. It is a low noise, filterless
PWM architecture eliminates the output filter,
reducing external component count, system cost,
and simplify design.
The LY8010 is designed to meet of portable
electronic devices. The LY8010 is a single 5.5V
power supply, it is capable of driving 4Ω speaker
load at a continuous average output of 3.3 W with
10% THD+N. Not external heat-sink is required.
In cellular handsets, the earpiece, speaker phone,
and melody ringer can each be driven by the
LY8010.The gain of the LY8010 is externally
configurable which allows independent gain control
from multiple sources by summing the signals.
Output short circuit and thermal overload protection
prevent the device from damage during fault
conditions.
APPLICATION
„ Portable electronic devices
„ Mobile Phones
„ PDAs
PIN CONFIGURATION
Lyontek Inc. reserves the rights to change the specifications and products without notice.
5F, No. 2, lndustry E . Rd. IX, Science-Based Industrial Park, Hsinchu 300, Taiwan
TEL: [phone]
FAX: [phone]
1