GEP-2671 Datasheet, PDF (4/6 Pages) Level One – 24 PoE-Plus Gigabit Ethernet ports with 4 shared SFP slots + 2 Gigabit SFP slots 10/100/1000Mbps wire speed transmission and reception

PoE:
Power Budget: Max. 185W
Power Output: Up to 30W per port
Protection: Circuit protection to prevent power interference between ports
Management: PoE status, PoE on/off scheduling, PoE power delay, PoE live checking, Per port power
priority setting, PD classification identity
Pin Assignment: 1/2(+), 3/6(-)
Security:
Storm Control:
Prevents traffic on a LAN from being disrupted by a broadcast, multicast, or unicast storm on a port
Authentication:
IEEE 802.1X Radius/Tacacs+ authentication
PVE:
L2 isolation between clients in the same VLAN
Access Control List (ACL):
Support for up to 256 entries
Dynamic VLAN assignment
Filtering:
Port-/MAC-/IP-based security
Management:
Diagnosis:
Event / Error Log / Syslog
Port:
Easy Configuration Port (ECP) - configure client’s QoS and security capabilities
Single IP Management (SIM): Single IP management for a virtual stack function to switches
(GTL-2880/GTL-5280/GTP-2880/GTL-1072/GEP-2672)
Network:
HTTPS/SSL; SSH v1/v2; sFlow; RMON (groups 1, 2, 3 and 9) Management ; SNMP v1, v2c, v3 User-
based Security Model (USM); CLI via console port or Telnet; management VLAN; Private VLAN Edge
(PVE)
Performance
Backplane (Gbps):
52Gbps
MAC Address Table:
8K
Data Transfer Rate:
10/100/1000Mbps
Packet Forwarding Rate:
1000Mbps port - 1,488,000pps
100Mbps port - 148,000pps
10Mbps port - 14,880pps
Jumbo Frame (K):
9KB
Environment
Power Saving:
IEEE 802.3az Energy Efficient Ethernet:
- Automatically turns power off on RJ-45 port when detecting link down or Idle of client
- Cable length detection: Adjusts the signal strength based on the cable length
- Reduces the power consumption for cables shorter
Temperature (°C):
Operating: 0°C ~ 40°C
www.level1.com
Page 4 of 6