WBR-6003 Datasheet, PDF (2/5 Pages) Level One – 150Mbps Auto Channel Selection for low interference band Enlarge wireless network coverage through WDS technology

- Effortless wireless security with a simple push of the WPS button
- Built-in Wake-on-LAN feature to startup/shutdown computers remotely
- Built-in robust firewall to protect Internet access against intruders
- Simple setup with user-friendly interface
Specifications
System Specifications
Connectors and Cabling:
4 x 10/100Base-TX RJ-45 LAN Port
1 x 10/100Base-TX RJ-45 WAN Port
Button:
WPS Button; Reset Button
Indicator:
Status / WAN / Wireless LAN / LAN
Power:
Power Input: DC 5V / 1A
Standards & Protocols:
General: IEEE 802.3 10-BASE-T, Ethernet
IEEE 802.3u 100-BASE-TX, Fast Ethernet
IEEE 802.11e QoS provisioning at the MAC layer
IEEE 802.1X Port-based Network Access Control (PNAC)
IEEE 802.3x Ethernet Flow Control
IEEE 802.11i Wi-Fi Protected Access (WPA2)
IEEE 802.11b, IEEE 802.11g, IEEE 802.11n Wireless Networking
Static-IP Address, Dynamic IP Address (DHCP Client), PPPoE, PPTP, L2TP
Wireless
Operating Mode:
Wireless Distribution System (WDS): One-to-Many peer AP (Max. 4 peer APs)
Wireless Signal On / Off Button
Auto Channel Selection
Encryption:
WEP 64/128-bit Web share key encryption
WPA, WPA2, IEEE 802.1x RADIUS support
128-bit TKIP/AES encryption
SSID Broadcast On/Off
Wi-Fi Protect Setup (WPS) Configuration
Channel:
Ch.1 ~ 11 USA
Ch.1 ~ 13 EU
Antenna:
1 x 3dBi or 5dBi dipole antenna (fixed or detachable depending on regional SKU or local request)
Frequency Band (GHz):
2.4 GHz ~ 2.4835 GHz
Features
General:
Quality of Service (QoS): IEEE 802.11e Wi-Fi Multimedia (WMM)
VPN: PPTP, IPSec, L2TP Passthrough
DNS: v
DHCP: v
www.level1.com
Page 2 of 5