GEP-1061 Datasheet, PDF (2/4 Pages) Level One – 10-Port L2 Managed Gigabit PoE Switch, 2 x SFP, 802.3at PoEplus, 125W

Memory:
32MB
Buffer Memory:
4.1Mbits
Connectors and Cabling:
8x RJ-45 10/100/1000BASE-T PoE ports
2 x 100/1000Base-X SFP Slots
Button:
Reset / Factory Default Button
Indicator:
Power; Link/Active
Transmission Method:
Store-and-Forward
Power:
Power Consumption: < 80W
Power Input: 100-240V AC, 50-60 Hz, Internal Power Supply
Features
General:
Quality of Service (QoS):
8 hardware Priority Queues per port
Traffic classification based on IEEE 802.1p CoS
IPv4/IPv6 precedence/ type of service (ToS) / DSCP based
Rate Limiting - Ingress policer egress shaping and rate control
Spanning Tree:
Bridge Protocol Data Units (BPDU)
IEEE 802.1D MAC Bridges
IEEE 802.1d Spanning Tree Protocol (STP)
IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
Virtual Local Area Network (VLAN):
802.1Q tag-based VLAN - up to 4K VLANs and 4K VLAN IDs
Port-based VLAN
MAC-based VLAN
DHCP: DHCP Client; DHCP Relay (Layer 2)
IPv6:
IPv6 Ping / Trace /Telnet / Syslog / TFTP
IGMP:
IGMP v1/v2/v3 snooping; IGMP Queried; IGMP Filtering /Throtting
Port Mirroring:
One to One /One to Many
IEEE 802.3ad LACP Trunk
PoE:
Power Budget: Max. 125W
Support IEEE 802.3af (15.4 W)/IEEE802.3at (30W) on each port
Pin Assignment: 1/2(+), 3/6(-)
Dynamic Power Allocation
Auto disable after exceeding power budget
PoE Timer
Security:
DDOS Protection
CPU Guard
Port Isolation
Port Mirror /Remote Mirror
Broadcast / Multicast / Unknown Storm Control
802.1X
w^Aw^Cw.^Llevel1.com
Port Security
Page 2 of 4