WBR-6022 Datasheet, PDF (1/4 Pages) Level One – 300Mbps Wireless HomeGuard22 Router

300Mbps Wireless
HomeGuard22 Router
H/W Version: 1
Surveillance simplicity at its finest
It used to be that if you wanted to set up a surveillance
system you needed deep networking knowledge or
had to call a professional installer to get the job done.
But now the new LevelOne HomeGuard22 (WBR-6022)
lets you build and customize a system on your own:
quickly and effortlessly.
How does it work?
All of the technical details (IP address assignment,
port-forwarding, etc) takes place within the
router. Just plug the camera(s) into the back of the
HomeGuard22 and it will discover and configure each
device for optimal compatibility.
WBR-6022
Access, view, and store
With your new security system up and running, users
can view their cameras to check in on their family or
pets while they’re away. The LevelOne DNS™ service
points directly to your cameras for fast and easy
viewing. Just open up any browser and type in your
device address and you can see your cameras no
matter where you are in the world.
The HomeGuard22 system is also compatible with
LevelOne’s NAS series to record video for an extra level
of security.
123
45
67
1. Wireless Signal On/Off Button
2. LED Indicators
3. WiFi Protected Setup(WPS) Button
4. Sleep Button
5. Power Port
6. LAN Interface
7. WAN Interface
Key Features
- 2 External and 1 internal antennas with 2T/3R MIMO
Technology for Wireless Data Rates of up to 300Mbps
- Home Surveillance with Multi-Camera Live
Monitoring, Snapshot, Recording* and Playback
- Supports up to 4 Live Video Feeds
- Supports Continuous, Manual or Scheduled
Recording* Modes
- Playback with Media Player Software
- Remote Access with Level1DNS™ Service
- Wireless Security with WEP, WPA, WPA2, 802.1x
RADIUS
- Built-In Firewall and Quality of Service
- Quick and Easy Setup Wizards
Works Well With
WCS-0020
11b/g Wireless P/T/Z IP
Network Camera
FNS-1020
1-Bay Simple Network Storage
(H/W: 2.0)
* To record IP camera video feeds, WBR-6022 must be used with
FNS-1020 (H/W: 2.0)