VDS-0202 Datasheet, PDF (1/3 Pages) Level One – Low-Latency for Video/Voice/Data applications

Ethernet over VDSL2
Converter (BNC)
H/W Version: 1
Why convert Ethernet to VDSL?
The LevelOne VDS-0202 converts your data from
Ethernet to VDSL, making it easy to send high-
bandwidth data over long distances. This new
technology uses traditional coaxial cable instead of
expensive Cat.5 cables.
New technology = cost-effective deployment
When using VDSL2 (Very High Speed Digital
Subscriber Line) technology, users can transmit data
up to 400 meters without having to add expensive
Ethernet switches or cables to extend the network
reach. And with 100Mbps downstream and 60Mbps
upstream, VDSL2 technology provides ample space
for all high bandwidth usage.
Fast transfer speeds? Yes.
Easy Installation? Yes.
VDS-0202 works especially well in applications
where traditional coaxial cables are already installed:
apartments, condominiums, hotels, university campus,
VDS-0202
etc. There is no need to run expensive Ethernet cables
and installers can easily integrate VDSL technology
into the existing network. The VDS-0202 is plug and
play ready and requires minimum installation time.
Customized settings
Each VDS-0202 also allows for customized settings for
advanced use. Using a built-in DIP switch, users can
customize the behavior of the device to match the
desired network configuration.
BNC connector
For networks that utilize coaxial cables for the Digital
Subscriber line.
1
2
34
5
5
1. LEDs
2. Dip Switch
3. Power Port
4. BNC 10 nnector
5. 10/100Mbps Ports
Key Features
- Supports a VDSL connection up to 2km over single
pair copper wire
- Provides100Mbps downstream and 60Mbps
upstream over 400m
- Features selectable Fast and Interleaved modes
- Selectable fixed data rate and fixed SNR margin
- Features 4 Dip Switches for Configuration Settings
- Low-Latency for Video/Voice/Data applications
Works Well With
FSW-0811
8-Port Fast Ethernet Switch
WBR-6001
N_Max Wireless Broadband Router
2