VDS-0200 Datasheet, PDF (1/3 Pages) Level One – Ethernet over VDSL2 Converter (AnnexA)

Ethernet over VDSL2
Converter (AnnexA)
H/W Version: 1
Why convert Ethernet to VDSL?
The LevelOne VDS-0200 converts your data from
Ethernet to VDSL, making it easy to send high-
bandwidth data over long distances. This new
technology uses traditional twisted-pair telephone
wiring instead of expensive Cat.5 cables.
New technology = cost-effective deployment
When using VDSL2 (Very High Speed Digital
Subscriber Line) technology, users can transmit data
up to 300 meters without having to add expensive
Ethernet switches or cables to extend the network
reach. And with 100Mbps downstream and 60Mbps
upstream, VDSL2technology provides ample space for
all high bandwidth usage.
Fast transfer speeds? Yes.
Easy Installation? Yes.
VDS-0200 works especially well in applications where
traditional copper phone lines are already installed:
apartments, condominiums, hotels, university campus,
VDS-0200
etc. There is no need to run expensive Ethernet cables
and installers can easily integrate VDSL technology
into the existing network. The VDS-0200 is plug and
play ready and requires minimum installation time.
Customized settings
Each VDS-0200 also allows for customized settings for
advanced use. Using a built-in DIP switch, users can
customize the behavior of the device to match the
desired network configuration.
Annex A
For networks that utilize PSTN telephone systems.
1
2
34 5 6
6
1. LEDs
2. Dip Switch
3. Power Port
4. Telephone Port
5. VDSL2 Interface
6. 10/100Mbps Ports
Key Features
- Supports a VDSL connection up to 2km over single
pair copper wire
- Provides100Mbps downstream and 60Mbps
upstream over 300m
- Features selectable Fast and Interleaved modes
- Selectable fixed data rate and fixed SNR margin
- Features 4 Dip Switches for Configuration Settings
- Low-Latency for Video/Voice/Data applications
Works Well With
FSW-0811
8-Port Fast Ethernet Switch
WBR-6001
N_Max Wireless Broadband Router
2