VDS-0111 Datasheet, PDF (1/3 Pages) Level One – Ethernet over VDSL2 Converter (Receiver)

Ethernet over VDSL2
Converter (Receiver)
H/W Version: 1
The VDS-0110 and VDS-0111, a line power pair of
VDSL2 (Very high-bit-rate Digital Subscriber Line)
converters, providing a broadband transmission up
to 100/60Mbps downstream/upstream data rate over
single pair copper line for point-to-point Ethernet
connectivity. With 100/60Mbps data rate, VDS-0110/-
0111 supports transmission distance up to 350m for
line power connections.
The line power is supplied from the VDS-0110 to
VDS-0111 and conforms to the Safety-Extra-Low-
Voltage (SELV) standards. With plug-and-play features
and minimum installation time, VDS-0110 is always
configured as master mode for central side, and VDS-
0111 as slave mode for remote side.
VDS-0111
The VDS-0110/-0111 conforms to the ITU-T G.993.1
and G.993.2 to meet VDSL/VDSL2 and SG15Q4 DMT
for network requirements. A pair of VDS-0110/-
0111 offers a cost effective line power solution for
bandwidth-hungry applications such as LAN-to-LAN
connectivity, Video Streaming, FTTB, and MDU/MTU
over single twisted pair telephone line.
1
2
3
4
1. LEDs
2. Dip Switch
3. VDSL2 Interface
4. 10/100Mbps Port
Key Features
- Compliant with ITU-T G.993.1, G.993.2 VDSL/VDSL2
and SG15Q4 DMT
- 100/60Mbps Downstream/Upstream for distance up
to 350m
- Supports Line Powered VDSL2 connection
- Conforms Safety-Extra-Low-Voltage (SELV) standard
- RJ11 for DSL interfaces + RJ45 for Ethernet LAN port
- 5 LED Indicators for VDS-0110(Master)
- 4 LED indicators for VDS-0111(Slave)
- 4 Dip Switches for Configuration Settings
- Trellis Coding supports up to 1024 Discrete Multi-
Tone (DMT) bins
- Auto MDIX for 10/100 BaseT Ethernet LAN Ports
- Low-Latency for Video/Voice/Data applications
- Line Surge Protection
- Selectable Fast and Interleaved modes
- Selectable fixed data rate and fixed SNR margin
Works Well With
VOI-7100
PoE IP Phone
FCS-1081
PoE IP Camera
2