POT-0100 Datasheet, PDF (1/2 Pages) Level One – PoE Repeater over 2-wire (Master)

PoE Repeater over
2-wire (Master)
H/W Version: 1
The POT system, one master & one slave units, provide
a long-reach Ethernet extension with remote Power-
over-Ethernet (PoE) capability over a 2-wire line.
Connection with a Class 0 PD device, the distance
of two-wire 24AWG cables can be up to 400 meters
when using a 48Watt high power PoE Switch,
FSW-0513/0543. Users may select a fixed data rate for
different copper line ranging. The maximum data rate
can be up to 60 Mbps full duplex for 2-wire line.
The POT master unit is powered by the local PoE
Ethernet network, and transmits both the data and
power to the remote slave unit over 2-wire cable. The
POT-0100
remote unit regenerates the power and provides the
PoE capability to power up the remote PD device up
to 15 watts when connecting to 48Watt High Power
Switch, FSW-0513. The POT M/S supports the indoor &
outdoor models with wall-mount feature.
Equipped with dip switches, the 2-wire line speed
can be configured to meet different line gauges and
distances. A POT pair offers a cost effective solution
for remote power applications such as LAN-to-LAN
connectivity, Video Streaming, FTTB, and MDU/MTU
over single twisted line.
1
2
3
4
1. LED Indicator
2. Dip Switch
3. RJ-11 Out
4. RJ-45 In
Key Features
- Two-wire cables are used to connect 100Mbps Fast
Ethernet PoE devices
- Maximum distance up to 500 meters for 24 AWG
cable
- Maximum data rate up to 60Mbps full duplex
- Remote PoE capability for PD devices of WiFi AP, IP
camera, IP telephones
- Up to 15 Watts for remote PoE, Depending on PSE
power
- Easy installation by indoor & outdoor different
models
- Dip Switches for 2-wire line rate settings
- Auto MDIX for 10/100 Base-Tx Ethernet LAN Ports
- Low-Latency for Video/Voice/Data applications
Works Well With
POI-4000
High-power PoE Injector
FSW-0513
4-Port High Power PoE Switch