IES-1890 Datasheet, PDF (1/2 Pages) Level One – 16 FE plus 2 GE Combo SFP Managed Switch -40 to 75C, DIN-rail, IEC61850

IES-1890
16 FE + 2 GE Combo SFP Managed Switch
-40 to 75C, DIN-rail, IEC61850
Overview
LevelOne IES-1890 Industry Ethernet Switch provides 16 ports of
10/100Base-TX plus 2 ports of 1000Base Ethernet / SFP Combo to enable
high speed network at mission-critical environment. This device is
designed to be mounted on an industry standard DIN-rail, plus the
clearly visible status LEDs provide simple monitoring of port link activity.
Moreover, the SFP slots support pluggable modules that enabling you to
choose from a variety of transceivers.
GOOSE Message
Critical GOOSE (Generic Object Oriented Substation Event) messages
can be sent reliably using the multicast and prioritisation functionality
within LevelOne Industrial switches. Moreover, the test was conducted
by KEMA, a renown laboratory for testing and certi cation for
substations.
Management
It supports a variety of management features including: CLI via Console
or Telnet; Graphic User Interface via Web Browser or Simple Network
Management Protocol via SNMP tools. It provides better visibility and
management of those critical assets.
High Reliability
All components are built to withstand harsh environment applications
without compromise where humidity, temperature variation and even
shock vibration are concerns, including Electric & Utility, Critical
Infrastructure, Transportation and Surveillance Security. This device
operates under -40 to 75 Celsius (-40 to 167 Fahrenheit) temperature.
Resilient Ring Network
Supports Ring topology network providing simple installation and ultra
fast network recovery performance, less than 15ms. Unlike much
complex resilient topology, such as a redundant star, the Ring simpli es
the network design and requires less cabling installation. In addition,
fast network recovery time helps minimize system downtime.
Substation & Railway Applications
This device is complied with IEC 61850-3 / IEEE 1613 for the power
substations and EN 50121-4 for the railway applications. IEC 61850-3 is
an international standard for electrical substation systems. The standard
enables integration of all control, measurement, monitoring and
protection functions within a substation.
Features
- Complies with IEC61850-3/IEEE1613 for power substations &
EN50121-4 for railway applications
- Supports α-ring and RSTP/MSTP/STP for Ethernet redundancy and
GOOSE Message
- Zero Packet Loss pass by GOOSE Message
- IP Multicast Filtering through IGMP Snooping V1, V2 & V3
- Port-based VLAN and IEEE802.1Q VLAN Tagging and GVRP
- IEEE802.1p QoS with four priority queues
- MAC-based trunking and LACP
- IEEE802.1x Security
- Bandwidth Rate Control
- Per-port programmable MAC address locking
Diagrams
- Up to 24 Static Secure MAC addresses per port
- Port mirroring
- NTP synchronization
- DHCP Client/Server
- RS-232 Console, Telnet, SNMP V1, V2c & V3, RMON, Web Browser, and
TFTP Management
- 1000Mbps-Full-duplex, 10/100Mbps-Full/Half-duplex,
Auto-Negotiation, Auto-MDI/MDIX
- Full wire-speed forwarding rate
- -40°C to 75°C (-40°F to 167°F) operating temperature range, tested for
functional operation @ -40°C to 80°C (-40°F to 176°F)
Unit: mm
84
125
145
84
Front
Side
Top
Buttom