IES-1610 Datasheet, PDF (1/2 Pages) Level One – 16 FE Unmanaged Switch -10 to 60, DIN-rail

IES-1610
16 FE Unmanaged Switch -10 to 60, DIN-rail
Overview
LevelOne IES-1610 Industry Ethernet Switch provides 16 ports of
10/100Base-TX Ethernet to enable high speed network at
mission-critical environment. This device is designed to be mounted on
an industry standard DIN-rail, plus the clearly visible status LEDs provide
simple monitoring of port link activity.
Redundancy
This redundant power system is designed to meet the challenge of
power failure to ensure reliability and constant availability. Single power
design works ne in non-critical network applications, but it falls short
drastically for network applications in transportation, automate
production or banking.
Cost E ective
This device operates under -10 to 60 Celsius (-14 to 140 Fahrenheit)
temperature that o ers optimal suitability for industrial applications at
low cost while maintaining all components built to withstand harsh
environment applications without compromise reliability and stability.
Safety
This device has been tested under UL508 standard for Industrial Control
Equipment to endurance under test turn on and o 6,000 times while
loaded, with no single failure. It’s highly reliability and safety
measurement to ensure eld hardened, especially for the harsh
environment.
Reliability
Rugged IP30 rated metal housing is designed for industrial applications.
With protection against ingress of dirt and solid metal housing to ensure
a long-last operating life under harsh environments.
Plug & Play
This unmanaged Industrial Ethernet Switch is designed for the
demanding industrial environments at businesses in need of instant
connectivity with no setup or con gure required, truly plug and play.
Features
- Provides exibility of 16 10/100BASE-TX ports
- Supports 10/100Mbps-Full/Half-duplex, Auto-Negotiation,
Auto-MDI/MDIX
- Redundant power inputs (12 - 48VDC) with Terminal Block and DC
Jack (12VDC)
- Alarms for power failure by relay output
- -10°C to 60°C (14°F to 140°F) and is tested for functional operation @
-20°C to 70°C (-4°F to 158°F)
- Provides DIN-rail, panel or rack mounting
- Complies with IEC61000-6-2 EMC Generic standard immunity for
Industrial environment
Diagrams
Unit: mm
69
Front
Side
Top
Buttom