English
Language : 

IES-1084 Datasheet, PDF (1/2 Pages) Level One – 8 x 802.3af/at plus 2 GE TX Managed Switch -40 to 75C, DIN-rail
IES-1084
8 x 802.3af/at + 2 GE TX Managed Switch
-40 to 75C, DIN-rail
Overview
LevelOne IES-1084 Industry Ethernet Switch provides 8 802.3af/at
PoE ports of 10/100Base-TX plus 2 ports of 10/100/1000Base
Gigabit Ethernet to enable high speed network at mission-critical
environment. This device is designed to be mounted on an industry
standard DIN-rail, plus the clearly visible status LEDs provide simple
monitoring of port link activity.
Resilient Ring Network
Supports Ring topology network providing simple installation and ultra
fast network recovery performance, less than 15ms. Unlike much
complex resilient topology, such as a redundant star, the Ring simpli es
the network design and requires less cabling installation. In addition,
fast network recovery time helps minimize system downtime.
High Reliability
All components are built to withstand harsh environment applications
without compromise where humidity, temperature variation and even
shock vibration are concerns, including Electric & Utility, Critical
Infrastructure, Transportation and Surveillance Security. This device
operates under -40 to 75 Celsius (-40 to 167 Fahrenheit) temperature.
Management
IES-1084 supports a variety of management features including: CLI via
Console or Telnet; Graphic User Interface via Web Browser or Simple
Network Management Protocol via SNMP tools. It provides better
visibility and management of those critical assets.
Power over Ethernet
This switch is Power Sourcing Equipment (PSE), and it is fully complied
with IEEE 802.3af & 802.3at PoE standard at maximum 15.4W / 30W
power budget per port. It helps to save infrastructure wiring costs
dramatically by eliminating electric wiring and less UPS needed.
Features
- Supports PoE Power Sourcing Equipment (PSE)
- PoE control and scheduling
- Supports α-ring and RSTP/MSTP/STP for Ethernet redundancy
- IP Multicast Filtering through IGMP Snooping V1, V2 & V3
- Supports port-based VLAN and IEEE802.1Q VLAN Tagging and GVRP
- IEEE802.1p QoS with four priority queues
- MAC-based trunking with automatic link fail-over
- RS-232 console, Telnet, SNMP V1, V2c & V3, RMON, Web Browser, and
TFTP Management
- Supports Command Line Interface in RS-232 Console
Diagrams
Safety
This device has been tested under UL508 standard for Industrial Control
Equipment to endurance under test turn on and o 6,000 times while
loaded, with no single failure. It’s highly reliability and safety
measurement to ensure eld hardened, especially for the harsh
environment.
- Supports IEEE802.1x Security
- Bandwidth Rate Control
- Per-port programmable MAC address locking
- Up to 24 Static Secure MAC addresses per port
- Port mirroring
- NTP synchronization
- 1000Mbps-Full-duplex, 10/100Mbps-Full/Half-duplex,
Auto-Negotiation, Auto-MDI/MDIX
- Full wire-speed forwarding rate
- -40°C to 75°C (-40°F to 167°F) operating temperature range, tested for
functional operation @ -40°C to 85°C (-40°F to 185°F)
Unit: mm
71.4
140
Front
Side
Top
Buttom