IES-0820 Datasheet, PDF (1/2 Pages) Level One – 8 FE Unmanaged Switch -40 to 75, DIN-rail

IES-0820
8 FE Unmanaged Switch -40 to 75, DIN-rail
Overview
LevelOne IES-0820 Industry Ethernet Switch provides 8 ports of
10/100Base-TX Ethernet to enable high speed network at
mission-critical environment. This device is designed to be mounted on
an industry standard DIN-rail, plus the clearly visible status LEDs provide
simple monitoring of port link activity.
Redundancy
This redundant power system is designed to meet the challenge of
power failure to ensure reliability and constant availability. Single power
design works ne in non-critical network applications, but it falls short
drastically for network applications in transportation, automate
production or banking.
High Reliability
All components are built to withstand harsh environment applications
without compromise where humidity, temperature variation and even
shock vibration are concerns, including Electric & Utility, Critical
Infrastructure, Transportation and Surveillance Security. This device
operates under -40 to 75 Celsius (-40 to 167 Fahrenheit) temperature.
Plug & Play
This unmanaged Industrial Ethernet Switch is designed for the
demanding industrial environments at businesses in need of instant
connectivity with no setup or con gure required, truly plug and play.
Oil & Gas Hazardous Application
Comply with Class 1, Division 2 certi ed, UL 1604 standard (UL
ISA12.12.01) is a higher level certi cation to assure that products can be
safely operated where speci c potentially ammable or explosive
materials may be present. Sparks can be highly dangerous in the
presence of speci c ammable gases, vapors or liquids; such as oil and
gas re nery, as well as companies that deal with hazardous chemicals.
Features
Safety
This device has been tested under UL508 standard for Industrial Control
Equipment to endurance under test turn on and o 6,000 times while
loaded, with no single failure. It’s highly reliability and safety
measurement to ensure eld hardened, especially for the harsh
environment.
- Provides exibility of 8 Ethernet ports that con gure in combinations
of copper and ber optic interfaces
- Supports 10/100Mbps-Full/Half-duplex, Auto-Negotiation,
Auto-MDI/MDIX
- Redundant power inputs(12 - 48VDC) with Terminal Block and DC
Jack (12VDC)
- Alarms for power and port link failure by relay output
- -40°C to 75°C (-40°F to 167°F) operating temperature range, tested for
functional operation @ -40°C to 85°C (-40°F to 185°F)
Diagrams
- Provides DIN-rail or panel mounting
- Complies with NEMA TS2 Environmental requirements for Tra c
control equipment
- Complies with IEC61000-6-2 EMC Generic standard immunity for
Industrial environment
Unit: mm
50
DC JACK
TERMINA L BLOC K


110
Front
Side
Back
Top
Buttom