IES-0810 Datasheet, PDF (1/2 Pages) Level One – 8 FE Unmanaged Switch -20 to 60, DIN-rail

IES-0810
8 FE Unmanaged Switch -20 to 60, DIN-rail
Overview
LevelOne IES-0810 Industry Ethernet Switch provides 8 ports of
10/100Base-TX Ethernet to enable high speed network at
mission-critical environment. This device is designed to be mounted on
an industry standard DIN-rail, plus the clearly visible status LEDs provide
simple monitoring of port link activity.
Redundancy
This redundant power system is designed to meet the challenge of
power failure to ensure reliability and constant availability. Single power
design works ne in non-critical network applications, but it falls short
drastically for network applications in transportation, automate
production or banking.
Cost E ective
This device operates under -20 to 60 Celsius (-4 to 140 Fahrenheit)
temperature that o ers optimal suitability for industrial applications at
low cost while maintaining all components built to withstand harsh
environment applications without compromise reliability and stability.
Plug & Play
This unmanaged Industrial Ethernet Switch is designed for the
demanding industrial environments at businesses in need of instant
connectivity with no setup or con gure required, truly plug and play.
Reliability
Rugged IP30 rated aluminium housing is designed for industrial
applications. With protection against ingress of dirt and solid metal
housing to ensure a long-last operating life under harsh environments.
Features
Safety
With UL60950 standard complied that gives basic protection against
electric shock, re spread from within, ignition and burning, current
circuit hazardous under normal and fault condition. As well as set of
compliances to meet many EMC, isolation, vibration and shock
standards.
- Provides exibility of 8 Ethernet ports that con gure in combinations
of copper and ber optic interfaces
- Redundant power inputs with Terminal Block or DC Jack
- -20°C to 60°C (-4°F to 140°F) and is tested for functional operation
@-30°C to 70°C (-22°F to 158°F)
- 10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX
- Complies with IEC61000-6-2 EMC Generic standard immunity for
Industrial environment
- Alarms for power failure by relay output
Diagrams
125
DC JACK
Unit: mm
50
Front
TERMINAL BLOCK
Side
Back
Top
Buttom