|
LWH1056 Datasheet, PDF (9/16 Pages) LUXPIA – Specification for Approval | |||
|
◁ |
8. Packing
⢠The LEDs are packed in cardboard boxes after taping. The label shows part number, lot
number, rank, and quantity.
⢠In order to protect the LEDs from mechanical shock, they are packed with cardboard boxes
for transportation.
⢠The LEDs may be damaged if the boxes are dropped or receive a strong impact against them,
so cautions must be taken to prevent any possible damage.
⢠The boxes are not water-resistant and, therefore, must be kept away from water and
moisture.
⢠When the LEDs are transported, it is recommended that the same packing method as Luxpia's
is used.
⢠If noticeable damage on a box appears upon arrival at the userâs warehouse, the user should
submit a claim to Luxpia within one week after arrival of the products.
8/15
|
▷ |