W1250 Datasheet, PDF (3/3 Pages) Lumins Inc. – Ceiling mount

L UM INIS
Slope ceiling adaptor
SW45
SB45
Suspension power cord
Note: cable size
and type may
change at factory
discretion upon
availability, to
accommodate
required wiring
with selected
option.
Safety suspension cable
Option: SW45
45º hang straight ball swivel
for 5/8” dia. suspension stem.
Option: SB45
45º hang straight ball swivel
for 5/8” dia. suspension stem.
with adaptor plate for W1250S
Option: SPW (White)
SPB (Black)
3/18 X 36”lg. power cord with
adjustable aircraft cable.
SPB Black power cable only
with options
EM42
EM242
QS
SYRIOS ^{Optional accessories}
Longer suspension stem
Option
*STA
option for:
W1250S
STM60
STM80
STA60:
STA80:
60” lg.X5/8” O.D.
suspension stem.
80” lg. X5/8” O.D.
suspension stem.
Stems can be cut on site
and rethreaded externally
(Tap size 1/4 IPS / 1/4-18)
For other factory cut to size length add
suffix -STM with desired length to
catalog# max.120”
Spiral suspension power cord
Option: TCW (White)
TCB (Black)
3/18 Spiral power cord Max. 277V
Standard extended length: 3ft.
Not applicable when using options
EM42
EM242
QS
Option: STC
Safety aircraft suspension cable,
for applications with earthquake
regulations.
Cables extends 18” beyond
canopy.
(Secured to building structure)
Overall length change:
STM2-
Option: STM2
Change total suspension length fro
standard length.
Specify desired length in inches.
EX: STM2-72”
Quartz lamp restrike
Option: QRS
Quartz restrike standby lamp kit.
When power failure is restored, it
will energize temporary Quartz
lamp with progressive dimming
until full H.I.D light output is
produced.
max.100w DC bayonet type.
(Lamp is not included.)
Not Applicable with CFL lamps.
Quartz lamp restrike
Option: QS
Quartz lamp socket for external
120V emergency power input.
Separate 120V dedicated wiring is
included.
max.100 W DC bayonet type.
(Lamp is not included.)
Not Applicable with CFL lamps.
Emergency battery back-up
EM42 / EM42S
HOT
One lamp:
26w: 450 Lmns..
32w: 575 Lmns.
42w: 750 Lmns.
Time: 90 Mnts -120/277V / T 0º C
EM Ballast wiring
diagram for 120V
factory connection.
Note: Use of Emergency battery, requires periodic
and regular testing to ensure correct operation.
(please refer to manufacturer’s instructions.
For 57w & 70w:
(Remote installation only) Consult factory
COM
EM42 wiring
EM42S wiring
BLK
WHT
AC ballast
WHT
EM
ballast
Black/120V (Factory wired)
Orange/277V
(Cap unused lead.)
Note:
EM42 option is
supplied with integral
test switch and pilot
light.
EM42S is supplied
with additional wiring
for external remotely
installed test switch
and pilot light.
Single pole test switch (Breaking the connection)
Luminaries may be altered for improvements or discontinued without prior notice.
LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309 Tel: [phone] Fax: 954 . 717.4157
LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5 Toll free: 888 .401 .6999
Page 128
Web: www.luminis.com
Sept. 2006 JAN.2008