PR1665 Datasheet, PDF (3/3 Pages) Lumins Inc. – Standard heavy duty 45 hang straight swivel

OPTIONS
MOUNTING
ACCESSORIES
ELECTRICAL
PR1660/PR1665
PRISMA NOVA 16 - HID/CFL
ELECTRICAL
2” (50)
CK
Ceiling surface mounting
conversion kit
Max. Watts: 70 MH or 2X42w CFL
Max. Watts with D16-L16 options
50MH or 2X32w CFL
STM
Factory cut to size stems up to
144” lg. (Specify length with STM
option suffix. Longer stems are
available with coupling.
Please consult factory.) 36” lg.
Standard stems can be shortened
on site.
SPG
4/18 X 36” lg. Silver braided
power cable C/W on site
adjustable suspension cable.
Longer suspension available
on request.
D16T
Clear prismatic bottom conical
lens with nickel plated clamp ring
L17
Clear Acrylic flat bottom lens with
nickel plated clamp ring
LB16T
Cross blade louver
(Same color as luminaire)
PR1660 Only
BC16
Aluminum lower diffuser band
(Same color as luminaire)
Exterior
same color
as luminaire
PR1665 Only
RP6
Inner reflector specular aluminum
Exterior same color as luminaire
EM
1 lamp (26/32/42W) 90 mnts.
Integral emergency battery back-up.
Overall dimension is increased
by 2” (50) from nominal std. length
to accommodate EM ballast.
1X26W 450 Lumens
1X32W 575 Lumens
1X42W 750 Lumens
120/277V only
Standard connection:
Test switch and indicator light are
installed with luminaire.
Factory pre wired for unswitched
luminaire
Option UH:
Uniform OAL with non EM ballast
luminaire for same installation is
available.
All Non EM Luminaires will be
increased by 2”.
+
-
+
Ballast
Luminaire
2X32w
2X42w
2X57w
2X70w
DS1
2X32/42/57/70W
Luminaire with 2 lamps.
Each lamp is separately controlled
externally. This option requires
1 ballast per lamp.
+
-
+
Ballast
QRS
Quartz restrike standby lamp kit.
Power failure: The quartz lamp is
energized.
Power is restored: Quartz lamp
will shut off as H.I.D. Light
resumes to full light emission.
Max. 100W DC Bayonet base.
(Lamp is not included.)
(Not applicable with CFL lamps.)
QS
BA15d DC bayonet socket
(Quartz lamp not included.)
120V Emergency input power.
Separate dedicated wiring for
external control. May be used for
H.I.D or CFL lamps. Max. 100W
-
+
Dimming
Ballast
Luminaire
2X57/70w
DM4 (Mark X)
2X57W 120V or 277V Dimming
ballast. Controlled externally.
This option requires
1 ballast per lamp.
DM1/DM2/DM3 (Mark X)
One dimming ballast for one or
two lamps.
Mark VII Dimming ballast on
request.
TA
3/4” NPT Suspension conduit
adaptor. (Conduit by others)
Supplied with 3X18 ga.X36” lg.
wiring. (Longer wires to be specified.)
GL16T
Zinc plated flat concentric
ring guard
Switching
mode
DS2
4X26/32/42W
Luminaire with 4 lamps. Each set
of 2 lamps is separately controlled
externally.
DMY
Other types of ballasts or
dimming ballasts such as 0-10V
Mark VII or Lutron or other
brands are available.
Please ballast type with DMY
option suffix. (Some restrictions
may apply)
LUMINIS Toll free: 866.586.4647 Fax: [phone]
260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5
Luminaires may be altered for design improvement or discontinued without prior notice.
Unless specified, lamps are not included with luminaires.
LUMINIS.COM
3