PR1265 Datasheet, PDF (3/3 Pages) Lumins Inc. – Standard heavy duty 45 hang straight swivel

OPTIONS
MOUNTING
ACCESSORIES
ELECTRICAL
PR1260/PR1265
PRISMA NOVA 12 - HID/CFL
ELECTRICAL
CK
Ceiling surface mounting
conversion kit
Max. Watts: 70 MH or 2X42w CFL
Max. Watts with D12-L12 options
50MH or 2X32w CFL
STM
Factory cut to size stems up to
144” lg. (Specify length with STM
option suffix. Longer stems are
available with coupling.
Please consult factory.) 36” lg.
Standard stems can be shortened
on site.
SPG
4/18 X 36” lg. Silver braided
power cable C/W on site
adjustable suspension cable.
Longer suspension available
on request.
D12T
Clear prismatic bottom conical
lens with nickel plated clamp ring
L11
Clear Acrylic flat bottom lens
with nickel plated clamp ring
LB12T
Cross blade louver
(Same color as luminaire)
PR1260 Only
BA12
Aluminum satin anodized lower
diffuser band
BC12
Aluminum lower diffuser band
(Same color as luminaire)
Exterior
same color
as luminaire
2” (50)
EM
1 lamp (26/32/42W) 90 mnts.
Integral emergency battery back-up
Overall dimension is increased
by 2” (50) from nominal std. length
to accommodate EM ballast.
1X26W 450 Lumens
1X32W 575 Lumens
1X42W 750 Lumens
120/277V only
Standard connection:
Test switch and indicator light are
installed with luminaire.
Factory pre wired for unswitched
luminaire.
Option UH: Uniform OAL with
non EM ballast luminaire for same
installation is available.
All Non EM Luminaires will be
increased by 2”.
+
-
+
Ballast
Luminaire
DS1
Luminaire with 2 lamps
Each lamp is separately controlled
externally.
QRS
Quartz restrike standby lamp kit.
Power failure: The quartz lamp is
energized.
Power is restored: Quartz lamp
will shut off as H.I.D. Light
resumes to full light emission.
Max. 100W DC Bayonet base.
(Lamp is not included.)
(Not applicable with CFL lamps.)
QS
BA15d DC bayonet socket
(Quartz lamp not included.)
120V Emergency input power.
Separate dedicated wiring for
external control. May be used for
H.I.D or CFL lamps.
Max. 100W
DMY
Other types of ballasts or
dimming ballasts such as 0-10V
Mark VII and Lutron or other
brands are available.
Please specify ballast type
with DMY option suffix. (Some
restrictions may apply)
PR1265 Only
RP2
Inner reflector specular aluminum
Exterior same color as luminaire
LUMINIS Toll free: 866.586.4647 Fax: [phone]
260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5
Luminaires may be altered for design improvement or discontinued without prior notice.
Unless specified, lamps are not included with luminaires.
LUMINIS.COM
3