W606 Datasheet, PDF (2/4 Pages) Lumins Inc. – Post top mount

L UMINIS
OPTIONAL ACCESSORIES _ECLIPSE
Push Release button lock
Option: LB1
For restricted access.
Locked push button.
Requires 8-32 hexagonal
key to release.
General notes:
Please specify selected option as a
suffix to luminaire model number.
ex: W614-M100-WHT-LB1
Each model is provided with a
listing of compatible options. Some
options may not be compatible
when used in the same luminaire.
Please check listings.
Reflector disc
Option: OS
18” Dia.
Aluminum oblong
reflector disc.
(Factory installed)
Applicable to
W632 & W640
13 1/4”
House side shield
Option:
H2 For post top
luminaires
H1 For bollard mount
luminaires.
Exterior white
enamel, and specular
aluminum inner
reflective surface.
The shield is inserted
and snaps inside the
diffuser.
360º on site rotation.
Slope ceiling adaptor
Option: SW45
45º hang straight
ball swivel
for 5/8” dia.
suspension stem.
Suspension safety cable
Option: STC
Additional safety
cable, extended
12” beyond
canopy
Adjustable down light (W780 series)
Option: DL4
50W / MR16 adjustable down light
Available with 120V power input. For other
voltages, please consult factory
Note:Other down light sources than shown with
option DL4 are available. Please consult factory.
Type III reflector
Option: RF3 / RA3 / RL3 / PR3
Type III Multifaceted
specular reflector.
(Single lamp only.)
Suspension stem
5/8” O.D. suspension stem.
STM60 60” lg.
STM80 80” lg.
For other factory cut to size length
add suffix -STM with desired
length to catalog# max.120”
Light distribution control
Option:
Type III light
distribution
R3 refractor
Option:
Type IV light
distribution
R4 refractor
Semi frosted diffuser
Option: LF1
Wall mount light options
Option: DL1
DL1-277
12V/50W MR16
Down light with integral
120/12V or 277/12V
electronic transformer.
other input voltages on
request.
Option: DL2
Open sealed
top cover
allowing up-
lighting
Option: DLC
DL1 / DL2
Combination.
Frosted lower
portion of
diffuser.
Emergency battery pack
For 57w & 70w: Consult factory
EM42
One lamp:
26w: 450 Lmns..
32w: 575 Lmns.
42w: 750 Lmns.
Time: 90 Mnts -120/277V T 0º C
Please refer to page 72 for
more details
Type IV reflector
Option: RF4 / RA4 / RL4
Type IV
Forward throw
aluminum specular
reflector.(Single
lamp only.)
Lamps & ballast
compatibility
Compact Fluorescent
Lamp
Watts
Lamp
base
Fuse
Option
FS
Ballast protection fuse
Available with H.I.D.
luminaires only
Note: FS option fuse is factory
calibrated and installed with
selected wattage.
Post mount luminaires:
FS installed with pole.
All other types:
FS is installed with luminaire.
Light photo sensor
Option: PH1 -120V
PH2 - 277 / 347V
Photo electric sensor,
factory installed with the pole
or inside fixture when pole is
not required.
26W
32W
42W
57W
70W
85W
120W
G24Xq3
G24Xq3
G24Xq4
G24Xq5
G24Xq6
2G8-1
2G8-1
Metal halide
Lamp Lamp ANSI
Watts base Code
39W
50W
70W
70W
100W
150W
150W
175W
T6/G12 M130
ED17 M110/M148
ED17 M198/M143
T6/G12 M139
ED17 M90/M140
ED17 M102/M142
T6/G12 M142
ED17 M57
Quartz lamp restrike
Option: QRS
Quartz restrike standby lamp kit.
When power failure is restored, it will
energize temporary Quartz lamp with
progressive dimming until full H.I.D
light output is produced.
max.100w DC bayonet type.
(Lamp is not included.)
Not Applicable with CFL lamps.
Quartz lamp restrike
Option: QS
Quartz lamp socket for external 120V
emergency power input.
Separate 120V dedicated wiring is included.
max.100 W DC bayonet type.
(Lamp is not included.)
Not Applicable with CFL lamps.
Luminaires may be altered for design improvements or discontinued without prior notice.
LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309 Tel: [phone] Fax: 954 . 717.4157
LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5 Toll free: 888 .401 .6999
Page 41
Web: www.luminis.com
Sept. 2006 Rev. Feb.2007