SR125 Datasheet, PDF (2/4 Pages) Lumins Inc. – Cast aluminum ballast housing.

TYPICAL Photometry Summary
4663
3947
2331
1166
Horizontal
plane
Vplearntiecal
Descriptive Information
Total Lms: 9300 Lumens
Total Input Watts: 128 W
Lamps: ED17/Clear Metal Halide
Total efficiency: 64%
BUG Rating: B2-U1-G1
Cutoff classification: Full-Cutoff
Distribution: Type III
SR125 SERIES
SCIROCCO - HID/CFL
SR125-M100
Outdoor report Polar graph
Maximum Candela = 4663 CP
Please visit our web site www.luminis.com for complete I.E.S. formatted download data.
LUMINAIRE SELECTION
MODEL#
SR125
LAMP SELECTION ¹
METAL HALIDE ⁶
ED LAMP TYPE
M50E
M70E
(ED17/E26 base)
M100E
M150E
ANSI M110
ANSI M98
ANSI M90
ANSI M102
CosmoPolis^TM Lighting System (includes lamp)
M60C
} ^{M90C (T6/PGZ12 base) 2800K, 70CRI}
90W/140W 277V Only
M140C
For better results, luminaire is
supplied for a horizontal lamp
position only. Please specify R3
Type III or R4 Type IV reflector
with lamp selection.
COMPACT FLUORESCENT
Single lamp
F132 1X32W
F142 1X42W
^{F 157 1X57W}
Two lamps
(Gx24q)
F232 2X32W
F242 2X42W
OPTIONAL
COSMOPOLIS^TM Lumistep^TM Dimming
LM60 (60W Step Dimming Ballast - 6 hours)
LM90 (90W Step Dimming Ballast - 6 hours)
LM140 (140W Step Dimming Ballast - 6 hours)
M60-120/277V
M90-277V
M140-277V
VOLTAGE ²
FINISH
STANDARD COLORS
120V
277V
347V
120V
277V
WHT Snow white
BKT Jet black
BZT Bronze
MST Matte silver
GRT Titanium gray
DGT Gun metal
CHT Champagne
120V
277V
347V
Optional colors
CS Custom color
RAL RAL# color
(Refer to color chart)
The CosmoPolis^TM system offers a step-dimming option.
The ballast will dim the 90W and 140W lamps to 60 % lamp power.
The ballast calculates the mid-point of the evening, which is the starting point for 6 hour LumiStep^TM.
8 or 10 hours LumiStep^TM available on request. * CosmoPolis^TM and LumiStep^TM are registered trademarks of Royal Philips Electronics.
OPTIONS
ELECTRICAL
Mounting
FS
PH
QS
QRS
Fuse ³
Photocell ³
120V Max. 100W bayonet lamp base for
emergency external power ⁴
Quartz lamp standby restrike.
Max. 100W bayonet lamp.
120-277V ⁵
ACA Pole mounted attachment with
45º support
ACW Wall mounted attachment with
45º support
APA Pole mounted shepherd arm attachment
APC Pole mounted straight arm attachment
APS Post top shepherd arm attachment
CAT Catenary suspension attachment
W Wall mounted shepherd arm attachment
T Wall mount straight arm attachment
STM 36” Field-cuttable stem with 45º swivel
(other lengths available, please specify)
Accessories
SPG Silver braided power cord with adjustable
suspension cable. 36” in length (other
lengths on request).
SC Safety cable extends 18” over mounting
plate (with stem mounting only)
SSC Stabilizer cables
HS House shield installed within the glass diffuser
R3 Type III distribution reflector
R4 Type IV distribution reflector
R5 Type V distribution reflector
NOTES
1- Unless otherwise noted, lamps are by others.
2- Luminaires are factory prewired for 120V (if no voltage is specified.) For other voltages, please specify with catalog number, or consult factory.
3- Fuse and photocell options are normally installed with poles when specified with Luminis luminaires. (Except for other types of mounting.)
4- QS option requires a separate 120V emergency external power line.
5- QRS option requires a 120/277V line.
6- High Pressure Sodium sources are available on request.
LUMINIS Toll free: 866.586.4647 Fax: [phone]
260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5
Luminaires may be altered for design improvement or discontinued without prior notice.
Unless specified, lamps are not included with luminaires.
LUMINIS.COM
2