W769 Datasheet, PDF (1/4 Pages) Lumins Inc. – Inner white enamel reflector.

W769
ECLIPSE - LED
Type:
QUANTITY:
Project:
Catalog
number:
Fixture
Wattage
Voltage
Finish
Option
Option
Option Option
W769
1- One piece .090” thick hard aluminum
to shade. Underside surface is painted
white enamel to optimize light
1
performance.
2
2- Inner white enamel reflector.
3- Set of 4 X 1/2” solid aluminum struts.
3
4- LED sealed optical beam control lens.
5- Cast aluminum LED heat sink.
4
6- Cast aluminum top assembly base
support with hinged mechanism.
7- 120/277V or 347V electronic driver
5
power supply.
8- Lower cast aluminum housing with 4” or
6
5” (102 or 127) O.D pole adaptor.
7
8
Materials
Eclipse is made of corrosion resistant 356 aluminum alloy with a copper (CU)
content of less than 0.1%.
LED printed circuit board is assembled with a cast aluminum heat sink designed
with fins pattern to optimize heat dissipation and luminaire efficacy. The driver is
enclosed in a separate cast aluminum chamber with a tool-less hinge mechanism
allowing a quick access for electrical maintenance without disturbing the optical
light chamber.
The lower cast aluminum housing fits on a 4” (102) or 5” (127) pole and contains
all electrical controls on a removable tray.
ELECTRICAL
LED
DRIVER 120/277V multi volt (50-60HZ) with a minimum starting temperature
of -30ºC/-22ºF. Optional 347V on request.

Output over voltage, Output over current and output short circuit
protection with auto-recovery. Over temperature protection (110ºC).
LED
Standard 4000ºK LED platform included. Optional 3000ºK and
3500ºK. Removable modular LED platform.
LIFE
51,000hrs L B (based on IESNA TM-21 Test Method and LM-80 data).
77 50
68,000hrs L B (calculated projection from LM-80 data).
70 50
FINISH
Five-stage preparation process including preheating of cast parts for air extraction,
and an environmentally friendly alloy sealant. Polyester powder coating is applied
through an electrostatic process and oven cured for long term finish.
MOUNTING
Maximum weight: 33lbs (15kg)
Eclipse is designed for ease of access and installation.
Standard luminaire fits on a 4” (102) or 5” (127) pole.
Alternate poles or wall attachments are proposed with high quality components
to meet multiple installation conditions.
Certification
Tested to UL1598 and CSA 22.2 #250. ETL listed wet location.
Photometric testing performed by an independent laboratory in accordance
with IES LM-79-08 standards at 25ºC. Lumen depreciation in accordance with
IESNA LM80 standards. CE certification on request.
Rated IP65.
30”
(762)
30.375
(770)
W769
EPA: 0.7
Access to
electrical
components
ECLIPSE features a
unique tool less swing
out shade assembly,
allowing a quick
access to luminaire
maintenance, leaving a
clean optical chamber
to ensure a high lumen
performance.
LUMINIS Toll free: 866.586.4647 Fax: [phone]
260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5
Luminaires may be altered for design improvement or discontinued without prior notice.
Unless specified, lamps are not included with luminaires.
LUMINIS.COM
1