W670 Datasheet, PDF (1/4 Pages) Lumins Inc. – Cast aluminum top removable sealed cover.

W670
ECLIPSE - HID
TYPE:
QUANTITY:
PROJECT:
CATALOG
NUMBER:
W670
FIXTURE
WATTAGE
VOLTAGE
FINISH
ELECTRICAL ELECTRICAL MOUNTING
OPTION
OPTION
OPTION
ACCESSORIES
OPTION
W670
1
1- Cast aluminum top removable sealed
cover.
2- One piece .090” thick hard aluminum
2
top shade.
3- Cast aluminum sealed removable lens
ring.
4- Standard type III multi-faceted specular
3
aluminum reflector.
4
5- Clear tempered lens.
5
6- Black top sealed housing cover.
7- Set of two cast aluminum supporting
6
struts.
8- Cast aluminum upper hinged housing.
7
9- Cast aluminum lower electrical chamber
housing.
8
9
MATERIALS
Eclipse is made of corrosion resistant 356 aluminum alloy with a copper (CU)
content of less than 0.1%.
Shade is made of hard aluminum .090” thick.
Optical chamber is designed as a self contained sealed housing, with a multi-
faceted standard type III reflector. Alternate lighting distributions are available.
Structural support arms are made with a built-in wire way.
Lamp is accessible by removing the bottom cast aluminum lens frame.
The upper cast aluminum housing is designed with a tool-less hinged
mechanism allowing a quick access for maintenance.
The lower cast aluminum housing fits on a 4” (102) or 5” (127) pole and contains
all electrical controls on a removable tray.
ELECTRICAL
HIGH INTENSITY DISCHARGE (H.I.D)
BALLAST Electronic 120/277V multi volt or 347V (50-60HZ) and a power
factor greater than 90%. End of life protection with a minimum
starting temperature of -4°F/-20°C.
SOCKET Pulse rated 4kV porcelain body with a nickel plated screw shell and
center contact rated 600V and 200°C leads.
FINISH
Five-stage preparation process including preheating of cast parts for air extraction,
and an environmentally friendly alloy sealant. Polyester powder coating is applied
through an electrostatic process and oven cured for long term finish.
MOUNTING
Maximum weight: 31lbs (14kg)
Eclipse is designed for ease of access and installation.
Standard luminaire fits on a 4” (102) or 5” (127) pole.
Alternate pole or wall attachments are proposed with high quality components
to meet multiple installation conditions.
CERTIFICATION
Tested to UL1598 and CSA 22.2 #250. ETL listed wet location.
CE certification on request.
Rated IP65
30”
(762)
31.75
(806)
Access to
electrical
components
EPA: 1.40
Eclipse features a
unique tool-less swing
out shade assembly,
allowing a quick
access to luminaire
maintenance, leaving a
clean optical chamber
to ensure a high lumen
performance.
LUMINIS Toll free: 866.586.4647 Fax: [phone]
260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5
Luminaires may be altered for design improvement or discontinued without prior notice.
Unless specified, lamps are not included with luminaires.
LUMINIS.COM
1