W616 Datasheet, PDF (1/4 Pages) Lumins Inc. – Post top mount

L UMINIS
7
6
Option
LB1
30”
12”
1
2
3
4
5
luminaire tilt
action.
Post top mount
Specification
ECLIPSE
W616 . W616LS
All exposed cast aluminum components are made of non corrosive
pure aluminum copper free (Aluminum is less than .1% copper
content.#356 alloy.)
The luminaire base assembly is built with a hinge
mechanism,allowing to tilt the top part of the luminaire to access the
electrical equipment. No tools required. The quick disconnect
ballast assembly is installed on a removable tray.
The lamp is accessible with a twist and lock action.
The ease of maintenance and lamp replacement concept will leave
the optical chamber free of finger prints and foreign particles,
Finish: All polyester powder baked coatings preceded with
a 5 baths preparation process. Meets military grade
MIL-C781706 with a 2000 hours salt spray test.
- Pulse rated porcelain socket or 75W/600V thermoplastic compact
fluorescent socket.
- One-piece molded silicone gasket with memory retention.
- High power factor CWA ballast. Or 98% P.F.electronic smart
ballast with end of life detection for compact fluorescent.
- All stainless steel hardware.
- All Moving and removable parts are sealed with a
memory retention silicone gasket.
1- Min. .093” hard aluminum shade, with underside
white enamel to maximize light performance.
2- 1/2” dia. solid aluminum struts.
3- White translucent U.V. protected high impact
acrylic cylindrical diffuser.
4- Cast Aluminum built-in hinge mechanism.
5- Cast Aluminum ballast housing with dissipation fins to maximize
heat dissipation and cool operation of ballast.
6- Cast Aluminum swing out housing,with safety cable retainer.
Push release button for quick access to electrical equipment.
(No tools required for maintenance.) Button may be locked for
limited access. (See option LB1)
7- Set of 8 interlocked cast aluminum louver blades.
W616
With 30” dia.
aluminum
shade
29 3/4”
W616LS
Less shade
Access
to lamp
Access
Ballast
Photometry
Separate updated technical
specification sheets with related
models and light sources with
I.E.S formatted photometry are
available on
90 ^{www.luminis.com.}
60
Certification
UL. Wet Location.
Model# Mounting
Mounting & E.P.A.
30
E.P.A: 1.24 sq./ft Max. weight: 45 lbs..
Installation: Mounts over a 4” or 5"O.D. Pole.X 4”ø tenon.
Light source selection
Voltage
Finish
For options details and
specifications, please refer
to pages 41.42.43
Options
Optional MH (ED17)
CF (Gx24q)
W616
W616LS
QL
ACA1
ACW1
EC3P
EC3W
ACA1
ACW1
EC3PS
EC3WS
M70
M100
M150
M175
HPS (ED17)
H70
H100
H150
QL lamp.
(Including:
generator,
power coupler
& discharge
vessel) 120V
Q55 Q85
Single lamp
F157
F170
F185
F120
Two lamps
F232
F242
F257
F270
Four lamps
F426
F432
(Lamps by others. Except for QL lamps)
120 V Standard factory
prewired
(If no voltage is specified)
(Refer to color chart)
Standard selection
For other voltages, please
WHT:Snow white
specify with catalog number. _{BKT: Jet black}
H.I.D. INDUCTION QL
208 V
240 V
277 V
347 V
480 V
120V
COMP. FLUO.
BZT: Bronze
GRT: Titanium gray
DGT: Gun metal
CHT: Champagne
MST: Matte silver
GNT: Forest green
Optional colors
CS: Custom color
Smart ballast 120/277
RAL: RAL# color
347 V (To specify)
LB1:
H2:
STS30:
Accessories
Release button lock
House shield.
Stainless steel shade.
Available with W616LS only.
EC6:
EC7:
EC5:
Double dropped
shade.
Single dropped
shade
18” dia.Cast
aluminum shade
FS:
PH1:
PH2:
Electrical
Fuse
120/277V photo cell
347V photo cell
Luminaires may be altered for design improvements or
discontinued without prior notice.
LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309 Tel: [phone] Fax: 954 . 717.4157
LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5 Toll free: 888 .401 .6999
Web: www.luminis.com
Sept. 2006 Rev. Feb.2007
Page 29