W1290 Datasheet, PDF (1/3 Pages) Lumins Inc. – Wall mount

L UMINIS
1 2 34
5
6
7
Wall mount
Specification
SYRIOS
W1290
8
All exposed cast aluminum components are made of non corrosive
pure aluminum copper free (Aluminum is less than .1% copper
content.#356 alloy.)
Finish: All polyester powder baked coatings preceded with
a 5 baths preparation process. Meets military grade
MIL-C781706 with a 2000 hours salt spray test.
- Pulse rated porcelain socket or 75W/600V thermoplastic compact
fluorescent socket.
- One-piece molded silicone gasket with memory retention.
- High power factor CWA ballast. Or 98% P.F.electronic smart
ballast with end of life detection for compact fluorescent.
- All stainless steel hardware.
- All Moving and removable parts are sealed with a
memory retention silicone gasket.
1- #12 Ga, Galvanized wall pressure mounting plate.
2- Cast aluminum ballast housing.
3- Cast aluminum modular optical light chamber.
4- up-light clear tempered glass.
Flush mount installation to avoid accumulation of debris.
5- Semi-specular aluminum reflector.
6- Cast aluminum sealed lens frame
7- Clear tempered lens.
8- White translucent acrylic cylindrical diffuser.
Mounting
9”
18” _{Lamps and wattage can}
be combined for up and
down lighting.
4”
To specify the desired
17”
9 1/2”
combination indicate the
following suffix with the
selected wattage code.
4 1/2”
7”
5 1/2”
Photometry
-SU ( For up light + selected wattage)
-SD ( For up light + selected wattage)
Separate updated technical
specification sheets with related
models and light sources with
I.E.S formatted photometry are
available on
90 www.luminis.com.
Example:
-SUP100 (Up light)
-SDM175 (Down light)
60
30
Certification
Mounting
UL. Wet Location.
Max. weight: 40 lbs.
Installation: Mounts over a standard 4” octagonal electrical box with
3 1/2” c/c mounting holes. (by others). Additional separate
mounting holes are provided with wall plate..
Model#
Light source selection
Voltage
Finish
W1290
MH (ED17)
2M70
2M100
2M150
2M175
HPS (ED17)
2H70
2H100
2H150
CF (Gx24q)
Single lamp
F2142
F2157
CF (Gx24q)
Two lamp
4F226
4F232
120 V Standard factory
prewired
(If no voltage is specified)
For other voltages, please
specify with catalog number.
H.I.D.
208 V
240 V
277 V
347 V
Compact fluorescent
smart ballast 120/277
(Refer to color chart)
Standard selection
WHT:Snow white
BKT: Jet black
BZT: Bronze
GRT: Titanium gray
DGT: Gun metal
CHT: Champagne
MST: Matte silver
GNT: Forest green
Optional colors
CS: Custom color
RAL: RAL# color
(Lamps by others)
347 V (To specify)
Please refer to page
128 for additional details.
Options
Accessories
L:
Set of 3 cast aluminum
louver rings.
SU:
Alternate up light source.
(Please specify.)
SD:
Alternate down light
source. (Please specify)
EM42S:
FS:
PH1:
PH2:
QS:
QRS:
Electrical
1 lamp (26/32/42W)
Fuse
120/277V photo cell.
347V photo cell.
Standby lamp socket.
H.I.D. lamp restrike
EM optional battery test switch and
pilot lamp are installed remotely.
(See page 128)
Luminaries may be altered for improvements or discontinued without prior notice.
LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309 Tel: [phone] Fax: 954 . 717.4157
LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5 Toll free: 888 .401 .6999
Page 125
Web: www.luminis.com
Sept. 2006 Rev. Feb.2007