W1280 Datasheet, PDF (1/3 Pages) Lumins Inc. – Wall mount

L UMINIS
1 2 34
5
6
7
Wall mount
Specification
SYRIOS
W1280
All exposed cast aluminum components are made of non corrosive
pure aluminum copper free (Aluminum is less than .1% copper
content.#356 alloy.)
Finish: All polyester powder baked coatings preceded with
a 5 baths preparation process. Meets military grade
MIL-C781706 with a 2000 hours salt spray test.
- Pulse rated porcelain socket or 75W/600V thermoplastic compact
fluorescent socket.
- One-piece molded silicone gasket with memory retention.
- High power factor CWA ballast. Or 98% P.F.electronic smart
ballast with end of life detection for compact fluorescent.
- All stainless steel hardware.
- All Moving and removable parts are sealed with a
memory retention silicone gasket.
1- #12 Ga, Galvanized wall pressure mounting plate.
2- Cast aluminum ballast housing.
3- Cast aluminum modular optical light chamber.
4- Up-light clear tempered glass.
Flush mount installation to avoid accumulation of debris.
5- Semi-specular aluminum reflector.
6- Cast aluminum sealed lens frame
7- Clear tempered lens.
Alternate model with internal lamp adjustability
allowing a 358º rotation X 30º tilt from vertical
position with P39/P70/P100 H.I.D. sources.
Mounting
Lamps and wattage
9”
can be combined for
18”
up and down lighting .
To specify the desired
combination indicate
4”
the following suffix
9 1/2”
with the selected
wattage code.
17”
4 1/2”
7”
5 1/2”
Photometry
-SU ( For up light + selected wattage)
-SD ( For up light + selected wattage)
Separate updated technical
specification sheets with related
models and light sources with
I.E.S formatted photometry are
available on
90 ^{www.luminis.com.}
Example:
-SUP100 (Up light)
-SDM175 (Down light)
60
30
Certification
UL. Wet Location.
Mounting
Max. weight: 40 lbs.
Installation: Mounts over a standard 4” octagonal electrical box
with 3 1/2” c/c mounting holes. (by others). Additional separate
mounting holes are provided with wall plate..
Please refer to page
128 for additional details.
Model#
W1280
Light source selection
MH (ED17)
2M70
2M100
2M150
2M175
HPS (ED17)
2H70
2H100
2H150
CF (Gx24q)
Single lamp
F2142
F2157
CF (Gx24q)
Two lamp
4F226
4F232
HP.AI.DR. ^lamps
2PH39 (PAR20)
2PH70 (PAR30L)
2PH100 (PAR38)
Adjustable
lamps
Voltage
Finish
120 V Standard factory
prewired
(Refer to color chart)
(If no voltage is specified)
Standard selection
For other voltages, please
specify with catalog number.
WHT:Snow white
BKT: Jet black
H.I.D.
208 V
240 V
277 V
347 V
BZT: Bronze
GRT: Titanium gray
DGT: Gun metal
CHT: Champagne
MST: Matte silver
GNT: Forest green
Compact fluorescent
smart ballast 120/277
347 V (To specify)
Optional colors
CS: Custom color
RAL: RAL# color
(Lamps by others)
Luminaries may be altered for improvements or discontinued without prior notice.
Options
Accessories
L:
Set of 3 cast aluminum
louver rings.
SU:
Alternate up light source.
(Please specify)
SD:
Alternate down light
source. (Please specify)
EM42S:
FS:
PH1:
PH2:
QS:
QRS:
Electrical
1 lamp (26/32/42W)
EM battery.
Fuse.
120/277V photo cell.
347V photo cell.
Quartz lamp socket
for external emergency
power.
Quartz restrike
standby relay.
EM optional battery test switch and
pilot lamp are installed remotely.
(See page 103)
LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309 Tel: [phone] Fax: 954 . 717.4157
LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5 Toll free: 888 .401 .6999
Web: www.luminis.com
Sept. 2006 Rev. Feb.2007
Page 121